Name this engine part
Thread Starter
Racer
Joined: Jul 2013
Posts: 485
Likes: 90
From: '97 Coupe & '07 Coupe in Allentown, PA
Name this engine part
What is the name and purpose of the piece being held in the photo below? The stock set-up had an accordion coupler between the air bridge and the throttle body. There was a small hole in the accordion that this piece fit into. Do I really need to drill a hole in the new red coupler for this piece? The car runs fine with no error messages.
Note that this is a ’97-’00 set up with the MAF before the power duct and a secondary sensor that plugs directly into the power duct.
Note that this is a ’97-’00 set up with the MAF before the power duct and a secondary sensor that plugs directly into the power duct.
Racer
Joined: Apr 2006
Posts: 435
Likes: 0
