2000 C5 with TSC C1247 C H
Thread Starter
1st Gear
Joined: Oct 2014
Posts: 1
Likes: 0
From: Crowley Texas
2000 C5 with TSC C1247 C H
hello guys, I am a newbie. I just purchase a 2000 C5. after a day, the brake and traction controle lights came on. I have pulled the codes and the C1247 CH code came up. I have tried to clear them, but come right back. I have diconneced the sensor below the master cylinder and the lights stay on and code still will not clear. Any thoughts on this problem?
On a second note, I can no longer program my FOBs. I have done the resolder trick and it worked for a couple days, but now it will not even see them when i go to training mode. I have purchased a new FOB and it will not program either. I did not see any codes in the DIC related to this...
Any help on these two issuse would be helpful
Bobby
Crowley, Texas
On a second note, I can no longer program my FOBs. I have done the resolder trick and it worked for a couple days, but now it will not even see them when i go to training mode. I have purchased a new FOB and it will not program either. I did not see any codes in the DIC related to this...
Any help on these two issuse would be helpful
Bobby
Crowley, Texas
