Help installing amp and sub
Thread Starter
NCM Lifetime Member
Joined: Aug 2015
Posts: 5,338
Likes: 4,284
From: Cunningham, TN
2021 Corvette of the Year - Modified
2020 C5 of the Year Winner- Modified
C5 of Year Finalist (appearance mods) 2019
St. Jude Donor '18 thru '26
Help installing amp and sub
I am going to be installing an amp and sub in my 03 Z06, and I need a little help.
I know how all the audio and power wiring connects together, my concerns are primarily running the power cable through the firewall to the battery, where to ground the amp in the rear, and how to disassemble the interior to run the wiring to the rear.
I have searched the forum, youtube, and google and found nothing specific to this installation in a C5 Corvette.
Any help is much appreciated.
I know how all the audio and power wiring connects together, my concerns are primarily running the power cable through the firewall to the battery, where to ground the amp in the rear, and how to disassemble the interior to run the wiring to the rear.
I have searched the forum, youtube, and google and found nothing specific to this installation in a C5 Corvette.
Any help is much appreciated.
Le Mans Master
Joined: Nov 2004
Posts: 8,718
Likes: 20
From: Dyer IN
Cruise-In IX Veteran
Pull battery and drop panel on passenger side and use factory grommet
Panel on passenger door sill will pull straight up. Use factory seat stud as ground
Can fit a medium to small amp under passenger seat
Panel on passenger door sill will pull straight up. Use factory seat stud as ground
Can fit a medium to small amp under passenger seat
Thread Starter
NCM Lifetime Member
Joined: Aug 2015
Posts: 5,338
Likes: 4,284
From: Cunningham, TN
2021 Corvette of the Year - Modified
2020 C5 of the Year Winner- Modified
C5 of Year Finalist (appearance mods) 2019
St. Jude Donor '18 thru '26
I've got the battery and passenger seat out. Looks like it will fit just fine, just need to get some velcro to secure to carpet.
Last edited by lewislgZ06; Feb 13, 2016 at 04:36 PM. Reason: specifics
Thread Starter
NCM Lifetime Member
Joined: Aug 2015
Posts: 5,338
Likes: 4,284
From: Cunningham, TN
2021 Corvette of the Year - Modified
2020 C5 of the Year Winner- Modified
C5 of Year Finalist (appearance mods) 2019
St. Jude Donor '18 thru '26
I tried pulling down on it, but it doesn't seem to want to come out. I don't want to break it, and I don't know how it is secured. There is a white round plastic plug that appears to hold it in. Does it snap out?
Thread Starter
NCM Lifetime Member
Joined: Aug 2015
Posts: 5,338
Likes: 4,284
From: Cunningham, TN
2021 Corvette of the Year - Modified
2020 C5 of the Year Winner- Modified
C5 of Year Finalist (appearance mods) 2019
St. Jude Donor '18 thru '26
Disregard pentavolvo, I finally got the panels down and got the wire fished through the OEM grommet and into the cabin. I think that was the most labor intensive part of the install, and I believe I've got it from here.
Thank you very much for the pointers.
Thank you very much for the pointers.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
10 Most Common Corvette Problems of the Last 20 Years!
Joe Kucinski
5 MOST and 5 LEAST Popular Corvette Model Years in History!
Joe Kucinski
2027 Corvette Buyer's Guide: Everything You Need to Know!
Joe Kucinski
Instructor
Joined: Jul 2014
Posts: 122
Likes: 7
I think running power cables through the firewall and interior is a big waste of time, and tough on the interior (and lower back) to say the least. I ran mine easily through the hydro-formed frame, and there is a major grounding point right there too - See here https://www.corvetteforum.com/forums...-c5-frame.html
The other (smaller) wires (rca's and power trigger) can easily be run under carpet from the rear of the console to the amp mount. No panels to be removed, but may have to poke a hole in carpet depending on where you mount the amp (and coupe vs convert).
Thread Starter
NCM Lifetime Member
Joined: Aug 2015
Posts: 5,338
Likes: 4,284
From: Cunningham, TN
2021 Corvette of the Year - Modified
2020 C5 of the Year Winner- Modified
C5 of Year Finalist (appearance mods) 2019
St. Jude Donor '18 thru '26
You're looking in the wrong place - there is a separate Audio forum :-)
I think running power cables through the firewall and interior is a big waste of time, and tough on the interior (and lower back) to say the least. I ran mine easily through the hydro-formed frame, and there is a major grounding point right there too - See here https://www.corvetteforum.com/forums...-c5-frame.html
The other (smaller) wires (rca's and power trigger) can easily be run under carpet from the rear of the console to the amp mount. No panels to be removed, but may have to poke a hole in carpet depending on where you mount the amp (and coupe vs convert).
I think running power cables through the firewall and interior is a big waste of time, and tough on the interior (and lower back) to say the least. I ran mine easily through the hydro-formed frame, and there is a major grounding point right there too - See here https://www.corvetteforum.com/forums...-c5-frame.html
The other (smaller) wires (rca's and power trigger) can easily be run under carpet from the rear of the console to the amp mount. No panels to be removed, but may have to poke a hole in carpet depending on where you mount the amp (and coupe vs convert).
This is the only social media I use, and I guess I don't understand some of the things about it. I did try to search for the information, but I was unsuccessful. That's why I asked for some help.
Melting Slicks
Joined: Jan 2009
Posts: 3,275
Likes: 739
From: Miami FL
I apologize for my ignorance Sir. I didn't know there was an audio forum, and I still haven't been able to find it.
This is the only social media I use, and I guess I don't understand some of the things about it. I did try to search for the information, but I was unsuccessful. That's why I asked for some help.
This is the only social media I use, and I guess I don't understand some of the things about it. I did try to search for the information, but I was unsuccessful. That's why I asked for some help.
I'm sure the advice was not given with that intention, if you consider the smiley that went with it 
Anyway, this is a link to the Audio Section, but that area is not C5 specific.
There is nothing wrong with asking here and I'm sure you'll benefit from from the experiences of the group.
