When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Because Wade does not get a chance to frequent the forums that often your best bet would be to call ARE and find out. One of the receptionists should be able to get you the information if Wade cannot come to the phone.
Matt, I called twice today, couldn't even get a dail tone, and their mailbox is always full so I thought I'd try here. But I admit I have not seen Nick, Wade or Barry on here in a while. I was really expecting my part today, atleast before this weekend.
Re: Paging Barry-A.R.E.......... (Miles in Michigan)
Thanks! The stock coilpacks are mounted on a bracket that is mounted on top of your stock valve covers. Ofcourse I don't want to cover this valve covers with them (you can't anyway) so I fabricated two aluminum brackets and mounted the 8 coilpacks onto them and used aftermarket sparkplug wires (MSD 8.5) and cut them to fit. It's still kind-of rough though, I'll trim and polish it later.
The only time I could see no one answering would be if all the lines were busy.. I call at least twice a day and 90% of the time I get the receptionist.
Either way, give them another shout tomorrow to make sure your stuff shipped.