When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Well I pulled the mufflers easy enough and the driver side secondary pipe slid through, but the passenger side second portion of the pipe won't slide over.
Do I need to drop the sway bar, it's looks like I can get it out if I do or maybe just the top bolts?
Well I pulled the mufflers easy enough and the driver side secondary pipe slide through, but the passenger side second portion of the pipe won't slide over.
Do I need to drop the sway bar, it's looks like I can get it out if I do or maybe just the top bolts?
Yes, if you drop the sway bar it should buy you the clearance you need to get it around the rear sub frame.
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Slideshow: A Jaguar designer's personal project imagines what a modern front-engined Corvette might look like if Chevrolet revisited the golden age of the Stingray.
Pulling off B&B bullets
