Our Deal #1 kept us pretty busy yesterday but now we are adding to the madness. (note: Mike is not crazy :crazy:)
SuperDeal #2
Been thinking about Supercharging??? You've seen the results. Now MMS is offering a package 2 ways. One for the DoIt Yourselfer and one as a turnkey package. This deal ends when the new MMS website :cool: launches in a few short weeks!!!
Why buy a P1SC kit when you can get a lot more for your money from MMS!!
Get the MMS D1SC Power kit
Kit includes:
D1SC Supercharger Kit - cooler denser intake charge, eliminate belt slippage, upgradable and More power!!!
48lb injectors - give yourself the freedom to make some real power. Base kits only come with 38lb injectors capable. These are the injectors that we ran on Bluthunder's 635 RWHP Monster!!
MMS Custom Programming - Get the programming from the place that knows how to make the power!! We tune '97-'03 LS1/LS6. We can even take care of those tricky '01-up Autos.
Self install kit - $6499
For those looking for a turnkey solution our deal is even better than before. $7999 - All the same goodies, plus you get a complete install, crank pinning and all necessary dyno time.
With our tuning we've seen gains from 185-220+ RWHP on 91 octane!!

Remember these deals won't last long!! When the new mmsracing website is up these deals end.
So stop your :cry ; :blueangel: :smash: and listen to the :reddevil inside of you. Your begging for more power :cool:
This deal is valid for all orders placed between 09/18/02 and the launch of the new website. All MMS customers who ordered a S/C kit from us within the last 30 days will receive a 10% off unrestricted coupon towards any future purchases. You must call before the site launch to receive the coupon.

Keep an eye out!! You never know when super deal #3 will pop up.

----------------------------------------------------------
With the launch of the all new MMS website in October, MMS is offering a myriad of superdeals.

We know everyones frustration of not being able to visit a useful site for sometime, but after working with three different web designers, I have found the man to bring my vision to life. So to say thanks for everyone's patience and continued support these deals are good until the new site is up and running. Think of it as an incentive to get my design team to hustle :D

Fortunately, those that visit these great message boards that we sponsor will have a crack at jumping on these deals. Visit this thread frequently as we will add new deals from time to time and also announce the launch of the ALL NEW mmsracing.com website

Here is your first superdeal!!! Keep in mind this offer only applies to orders placed after 9/17/02 thru the launch of the ALL NEW mmsracing.com website. Those that have ordered these packages recently please call us and we will offer you a special thank you and gift certificate!!!

Superdeal #1 - $2499:crazy: + core exchange or $500 core charge
MMS Stage II or Stage IIx LS1 cylinder heads (10.6:1 or 11.3:1, 2.02/1.57, REV dual valvesprings w/ titanium retainers and spring bases) contact us for LS6 head availability
MMS 218(.563")/224(.566")/229(.578") camshaft on 112 or 114 LSA
7.350" pushrods, MMS laser-cut valvetrain shims
Head Bolts & Gaskets, and of course MMS PCM Reprogramming

Guess what if you need it installed and dyno tuned, we have you covered!!
Installation + all the dyno time needed to tune your beast - $1100 for a Corvette and $950 for your F-body. Unbelievable!!! MMS can make it happen!!

There is no other shop on the West Coast that can offer you such a complete deal for that price. Drive-in on Monday, race home on Friday. That's the MMS pledge!!! Don't worry about scheduling, we have several people on staff to get yourself a complete package. We have it covered from top to bottom!! First come first served, we have the staff to provide you with a quick turnaround on your way to High Performance nirvana. Have a race to get to, we'll work with you to meet your deadline!!!


[Modified by Mike Morgan, 1:16 AM 9/18/2002]

 

Man, is this tempting...

If you wouldn't mind, I've got a few questions:

1. How much RWHP and RWTQ can I expect from an 01 Coupe with intake and exhaust mods??
2. How streetable is this?
3. What will it do to the gas mileage?
4. Will it pass CA smog?

Thanks! :)

 

Mike,

This is a great deal you have going on here and i would like to be first on the list!

I saw Alfromsd's vette after you installed his package and i was very impressed, great job!

I will call you in the morning.


Frank

 

If you are at 350 RWHP all ready, you won't be disappointed!
Thanks for being the first!!! :cheers:

 

1. Depends on h/c combo. The low side is 218 cam w/ stage II heads: 50-55 RWHP. On the high side 229 cam w/ stage IIx heads: 75-90RWHP
2. Depends on the package. With our custom tuning all drive well, but some better than others. 218 cam - seems like stock, 224 114LSA cam - seems like stock with a bit of rumble, 224 112 LSA cam - now you're talking I can feel the cam, 229 114LSA cam - a bit more shake than the 224 112, but really comes on strong on the topend. 229 112 LSA cam - What the hell, I'm driving a hotrod!!
3. Depends on the foot, but I have several people report better than stock highway gas mileage with our IIx heads and all three cams.
4. I wouldn't try it with the 229 cam. The 218 on 112 or 114 should pass if everything is in good working order. The 224 114 LSA has passed for several customers. The 224 w/ 112 LSA is a bit risky. Also the year has a lot to do with it. For example '97s have less stringent standards than '02s

 

That is one unfu*kingbelievable price. :crazy: :crazy: :crazy: :cheers:

 

WOW awesome price, if you was within 10 hours of me, I would have new heads and cam :yesnod:

 

I'm looking forward to a superdeal on a ATI D-1SC kit :D :D

 

Ok, one other question. How about ls6 heads for us z06 folks...

 

Man Mike, this is a killer deal! What about us folks that can't make it to Ca? How would you do the programming?

 

Any Deals coming up on Dyno Tuning?

vetterdstr :cheers:

 

Mike, who does your head porting? And if I allready have LS6 cores, how would that work out? Would you want mine to port or would you exchange them. Also is your PCM programming with LS1Edit? Is the program locked from further LS1Edit tuning if I allready have LS1Edit?


[Modified by kewlbrz, 10:27 AM 9/17/2002]

 

Can't wait to see it

 

Sorry guys, been busy :) Looks like I found something everyone can like

I'm looking forward to a superdeal on a ATI D-1SC kit :D :D
check out http://forums.corvetteforum.com/zerothread?id=381299 for our Supercharger package!!!

Ok, one other question. How about ls6 heads for us z06 folks...
We can do those too! The last two sets we did the owners kept their stockers and we are awaiting a third set. If you send us your cores you'll get a quicker turnaround.

Man Mike, this is a killer deal! What about us folks that can't make it to Ca? How would you do the programming?
I can do a pretty good mail order program for you. I have a bit of experience with these packages :jester
I also provide one reprogram at no add'l charge. So if you dyno the car and get a/f readings and autotap data I can pretty much nail it :cheers:

Any Deals coming up on Dyno Tuning?
You never know what Morgan may offer!!!

kewlbrz you have mail!!!

John's Vette, what state are you in. I'm sure I'll have something to entice you to visit Califonia :cool:

 

W:eek:W. This would be a great deal if I didn't have to figure out how to get the car to Kali. :yesnod:

BTW, nice THX intro on your website. :cheers:

 

Cali is a long long way from Florida :( :cry

 

Mike, are upgraded injectors required/recommended with just this upgrade?

I take it this deal is good through 9/30?

:cheers:

 

:yesnod:

 

Daaaayum :smash: :cheers: :smash:

 

Mike,

Concerning the low side, couldn't you get 50-55 RWHP with just the 218 cam and FLP headers w/ the stock heads? Can't wait to see what your second super deal is!