Help with intake removal. Pics inside

Reply Subscribe

Thread Tools

Search this Thread

Mar 17, 2018 | 01:22 PM

Robrote

Thread Starter

Burning Brakes

Joined: Aug 2017

Posts: 958

Likes: 177

From: Newark Delaware

Help with intake removal. Pics inside

Decided it was time to get the oil pressure sensor replaced and the intake cleaned up. What a dirty mess the engine is. I got the intake off with little issue. I did however break a vacuum line and I need help identifying it and if it's even still available. I've posted pics. One is an accordin looking line on the driver side. I also need the fitting that connects on the pass side valve cover that is cracked.

I have a good bit of oil around the sending unit. Are they known to leak?

Thank you in advance. This is my first venture into the LS engines, so take it easy on me.

I need the small elbow coming off the valve cover

I broke this line. Is it available? Am I screwed?

Mar 17, 2018 | 03:22 PM

Carl Timonen

Racer

Joined: Jun 2016

Posts: 380

Likes: 67

From: Kelso Wa.

On the drivers side is part of the evap system. The other side is the pcv system. As far as I know, both are available.

https://www.smcautoparts.com/Fuel-Pi...363-acx001.htm

https://www.corvettemods.com/C5-Corv...hoCdBcQAvD_BwE

Last edited by Carl Timonen; Mar 17, 2018 at 03:35 PM.

Mar 18, 2018 | 02:07 PM

mmartinez

Melting Slicks

Joined: Sep 2008

Posts: 3,138

Likes: 802

From: Espanola New Mexico

Yes oil pressure sending units do fail, they show very high oil pressure and they sometimes start leaking oil, lots of it.

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last

Forum Jump