WANNA GO LOW
Thread Starter
Melting Slicks
Joined: Oct 2002
Posts: 2,151
Likes: 1
From: N.CHARLESTON SC
WANNA GO LOW
:cool: I KNOW THERE ARE SOME REALLY LOW VETTES OUT THERE SO HOW DO I GET MINE LOWER THAN THE INCH I ALREADY HAVE BY TURNING THE STOCK BOLTS :confused: I BOUGHT THE 10" BOLTS FROM ECKLERS FOR THE REAR;WILL LONGER BOLTS WORK FOR THE FRONT :chevy
Racer
Joined: Sep 2000
Posts: 251
Likes: 0
From: Bristow VA
Re: WANNA GO LOW (TIKTGTR)
:cool: I KNOW THERE ARE SOME REALLY LOW VETTES OUT THERE SO HOW DO I GET MINE LOWER THAN THE INCH I ALREADY HAVE BY TURNING THE STOCK BOLTS :confused: I BOUGHT THE 10" BOLTS FROM ECKLERS FOR THE REAR;WILL LONGER BOLTS WORK FOR THE FRONT :chevy
Racer
Joined: Mar 2002
Posts: 488
Likes: 0
Re: WANNA GO LOW (Mark V)
Yup,
Cut the bushings up front. I cut most of my bucking off and while it is not as low as I would like it is still low enough to look dropped but still ride well. The rear, longer bolts are all you need.
Cut the bushings up front. I cut most of my bucking off and while it is not as low as I would like it is still low enough to look dropped but still ride well. The rear, longer bolts are all you need.
