ODB Port - No power
Thread Starter
Melting Slicks
Joined: Aug 2003
Posts: 2,145
Likes: 3
From: Ft. Worth TX
ODB Port - No power
Hey Everyone,
After much digging, I think I need to start my own thread. It seems that I have no power to the ODB port. There is power to the cigarette lighter in the arm rest and also under the climate control (i have replace that power with my electric cutouts which also have power and work). All associated fuses have been replaced or look good. I am using a scan tool for testing, but i don't get power to it. It works fine on my 2016 RAM, so not the scan tool.
Any ideas or what else I could be missing?
After much digging, I think I need to start my own thread. It seems that I have no power to the ODB port. There is power to the cigarette lighter in the arm rest and also under the climate control (i have replace that power with my electric cutouts which also have power and work). All associated fuses have been replaced or look good. I am using a scan tool for testing, but i don't get power to it. It works fine on my 2016 RAM, so not the scan tool.
Any ideas or what else I could be missing?
Moderator, Tech Contributor
Joined: Sep 2013
Posts: 15,630
Likes: 4,076
From: Cape Coral, Florida
Hey Everyone,
After much digging, I think I need to start my own thread. It seems that I have no power to the ODB port. There is power to the cigarette lighter in the arm rest and also under the climate control (i have replace that power with my electric cutouts which also have power and work). All associated fuses have been replaced or look good. I am using a scan tool for testing, but i don't get power to it. It works fine on my 2016 RAM, so not the scan tool.
Any ideas or what else I could be missing?
After much digging, I think I need to start my own thread. It seems that I have no power to the ODB port. There is power to the cigarette lighter in the arm rest and also under the climate control (i have replace that power with my electric cutouts which also have power and work). All associated fuses have been replaced or look good. I am using a scan tool for testing, but i don't get power to it. It works fine on my 2016 RAM, so not the scan tool.
Any ideas or what else I could be missing?
Last edited by C5 Diag; Jun 25, 2019 at 01:16 PM.
Safety Car
Joined: Mar 2005
Posts: 3,758
Likes: 1,216
From: Wisconsin
