4.10 User's...How Do You Like 'Em???
#1
Melting Slicks
Thread Starter
4.10 User's...How Do You Like 'Em???
Been thinking about going to 4.10's and would like some input from those who have them; how do you like them, are they quiet or do they whine, how about durability...street and strip? While I plan on doing some racing, 5000RPM launches are not my style. Have the hardened shaft, will 4.10s work for me. Appreciate your help and thanks.
Joe
Joe
#2
Drifting
Member Since: Mar 2001
Location: Rockford IL
Posts: 1,270
Likes: 0
Received 0 Likes
on
0 Posts
Re: 4.10 User's...How Do You Like 'Em??? (C54FUN)
I have the 4.10's and like them, just get used to buying tires though! :lol: As far as durability, I have quite a few 1/4 mile runs on them with no problems, however, I also had a hardened output shaft, and broke it in half the last time out. :eek: If you do a lot of road trips, it does buzz the motor pretty good, but it's nothing that's going to cause problems. Overall, I think they are great, especially for the track, but depending on how much power you have, they are almost useless on the street as you will always be spinning. Who cares how much power anyone has if you can't put it to the ground! :D
#3
Drifting
Member Since: Mar 2001
Location: Antioch IL
Posts: 1,578
Likes: 0
Received 0 Likes
on
0 Posts
Re: 4.10 User's...How Do You Like 'Em??? (kwik8racr)
If you do a lot of road trips, it does buzz the motor pretty good, but it's nothing that's going to cause problems.
#4
Safety Car
Re: 4.10 User's...How Do You Like 'Em??? (C54FUN)
Joe, I have the 4.10's in my A4 and love them. Being as you have a 6 speed you will like them even better, especially on the highway although the RPM with the A4 is not that bad but your .5 - 6th gear ratio to my .75 - OD ratio will like them even more. :yesnod:
#5
Live Free or Die
Re: 4.10 User's...How Do You Like 'Em??? (art91)
Joe,
I have the 4.10's and love them. I got mine at Cartek and they are quiet.
No problems so far. :D
Only turning 2100@ 80 mph, and pulled to 188 in sixth
5K launches are quite fun. You should try it some time.
You are more than welcome to meet me and drive my car again to get a feel for them.
Bob
I have the 4.10's and love them. I got mine at Cartek and they are quiet.
No problems so far. :D
Only turning 2100@ 80 mph, and pulled to 188 in sixth
5K launches are quite fun. You should try it some time.
You are more than welcome to meet me and drive my car again to get a feel for them.
Bob
#6
Premium Supporting Vendor
Member Since: Jan 2001
Location: Central Jersey
Posts: 17,681
Likes: 0
Received 8 Likes
on
8 Posts
Cruise-In II Veteran
Cruise-In III Veteran
Cruise-In V Veteran
Re: 4.10 User's...How Do You Like 'Em??? (Duntov-097)
If they are installed and shimmed properly they do not make any noises.. :)
#8
Burning Brakes
Member Since: Oct 2001
Location: Cape Coral Florida
Posts: 1,054
Likes: 0
Received 7 Likes
on
7 Posts
Re: 4.10 User's...How Do You Like 'Em??? (C54FUN)
I've got 3000mi. on my 410s and no issues and it is also another install by Cartek. Excellent mod and very enjoyable to drive around town. :smash:
#9
Drifting
Re: 4.10 User's...How Do You Like 'Em??? (movinup)
I am wondering about reliability issues with the 4.10 gears. I forum vendor/tuner is trying to sway me away from the 4.10's since he has had several come back with broken gears that were not covered by the manufacturer. He recomended the Getrag 3.73's for my vette. Any thoughts as to improvements over my 3.42's. TIA! :confused: :seeya
#13
Live Free or Die
Re: 4.10 User's...How Do You Like 'Em??? (NoRice4Me)
Almost 12k miles on mine. gears are still quiet
#16
Melting Slicks
Member Since: Mar 2001
Location: New Milford CT
Posts: 2,326
Likes: 0
Received 0 Likes
on
0 Posts
Re: 4.10 User's...How Do You Like 'Em??? (C54FUN)
One question! My stock MN6 2001 coupe is right on verge of breaking loose at wot in 1st and 2nd right now. In a day or two I will have the heads and cam etc. in there.
Does the throttle have to be feathered in the lower gears?
What is the MPH at 6500 rpm in 3rd with 4.10's?
Does the throttle have to be feathered in the lower gears?
What is the MPH at 6500 rpm in 3rd with 4.10's?
#17
Drifting
Re: 4.10 User's...How Do You Like 'Em??? (CJS)
Did most of you guys with 4.10's get the hardened shaft installed at the same time??? Just wondering if I should get it or not.
Thanks
Ben
Thanks
Ben
#18
Melting Slicks
Thread Starter
Re: 4.10 User's...How Do You Like 'Em??? (Ben01C5)
Guys, appreciate your inputs. Looks like I am going for them and plan to hang on to my 3.73s. Have the hardened shaft, so all I will require are the gears.
Bob, I just may give you a call and come drive that beast of yours.
Brent, if they have survived your launches, they should mine.
Thanks again...
Joe
Bob, I just may give you a call and come drive that beast of yours.
Brent, if they have survived your launches, they should mine.
Thanks again...
Joe
#19
Safety Car
Re: 4.10 User's...How Do You Like 'Em??? (C54FUN)
From what others have said previously the hardened shaft is only necessary if you race a lot. I don't so I'm not planning on buying it - just trhe 4.10's for me (followed by a ripper shifter - maybe) :yesnod: