Where does this ground go???

Reply Subscribe

Thread Tools

Search this Thread

Aug 26, 2021 | 08:49 PM

servohead

Thread Starter

Burning Brakes

Joined: Oct 2004

Posts: 792

Likes: 19

From: ME

Where does this ground go???

Hey guys - I need some help in general with routing the harnesses around my 02 Z06 engine. I bought it disassembled and I’m scratching my head. Any pictures or diagrams would help immensely that you may have. This picture here tonight For example I need to know where it’s bolted. Also there is a long ground wire from under the master cylinder… not sure where that goes either. Thanks !!

-Steve

Aug 26, 2021 | 09:06 PM

C5 Diag

Moderator, Tech Contributor

Joined: Sep 2013

Posts: 15,615

Likes: 4,062

From: Cape Coral, Florida

That is G107 (black with white stripe) which bolts to the back of the left cylinder head…it is the ground for the coil packs…one wire is left bank and the other is for the right !!

Last edited by C5 Diag; Aug 26, 2021 at 09:07 PM.

Aug 26, 2021 | 09:41 PM

C5 Diag

Moderator, Tech Contributor

Joined: Sep 2013

Posts: 15,615

Likes: 4,062

From: Cape Coral, Florida

There is a ground “strap” which is attached below the brake booster and that strap goes to the left engine block near the forward O2 sensor !!

Aug 26, 2021 | 10:12 PM

servohead

Thread Starter

Burning Brakes

Joined: Oct 2004

Posts: 792

Likes: 19

From: ME

This is fantastic !! Thank you very much for your help 👍🏻👍🏻👍🏻👍🏻

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last

Forum Jump