LS3 swap to C5
Instructor
Joined: Jun 2013
Posts: 143
Likes: 12
From: Ky
LS3 injectors are short. Just use the electrical adapters. Or solder in new pigtails like I mentioned above.
LS3 coils need different dwell data in the tune. Much easier to just use the LS1 coils. I think the coil packs will bolt on to the LS3 valve covers. If not, just use the LS1 covers.
LS3 coils need different dwell data in the tune. Much easier to just use the LS1 coils. I think the coil packs will bolt on to the LS3 valve covers. If not, just use the LS1 covers.
