Swaybar install writeup done
Thread Starter
Drifting
Joined: Jul 2000
Posts: 1,818
Likes: 3
From: SoCal
Swaybar install writeup done
Here yall go, photographed, torque specs from the GM manuals, and measurements of the FE1 vs Z06 bars: http://www.ls1howto.com/index.php?article=16
Intermediate
Joined: May 2002
Posts: 35
Likes: 0
From: Bend Or
Re: Swaybar install writeup done (jmX)
Hello, Jim. Great Article on Swaybar install. Very well written. My question to you is: I have the Z51 suspension, will I notice better cornering if I switch to the Z06 sway bar or even Hotchkiss? You mentioned that the Z06 bar is 23.4mm, do you know what size the z51 bars are? Thanks for your reply.
Marc BluGem Bend, Oregon
E-Mail: marc.schafler@coldwellbanker.com
Marc BluGem Bend, Oregon
E-Mail: marc.schafler@coldwellbanker.com
Thread Starter
Drifting
Joined: Jul 2000
Posts: 1,818
Likes: 3
From: SoCal
Re: Swaybar install writeup done (BluGem)
Thanks guys.
BluGem, my name isn't Jim.
I don't know the sizes on the Z51 bars, but if anybody has that info around I'd be more than willing to add the info to the page. I'm also wanting a photo of the 2001 style steel endlinks.
BluGem, my name isn't Jim.
I don't know the sizes on the Z51 bars, but if anybody has that info around I'd be more than willing to add the info to the page. I'm also wanting a photo of the 2001 style steel endlinks.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Drifting
Joined: May 1999
Posts: 1,580
Likes: 1
From: Shelbyville KY
Re: Swaybar install writeup done (jmX)
Most excellent, Jon! Thanks for posting this up! Anytime us DIY guys have to change stuff around, it seems like the swaybars have to come off for one reason or another, so this is a great reference site for that info, rather than always going back to the books! :cheers: :flag
Race Director
Joined: Mar 2001
Posts: 19,975
Likes: 6,777
From: Bonneville Salt Flats
Re: Swaybar install writeup done (AllCammedUp)
02-03 end-links are aluminum, not steel--just put them on my '01 (from Ken F.). :yesnod:
btw, the Corvette Black Books states that Z-51 bars were enlarged for 2000 but I don't see the sizes listed. Surely, someone has them close at hand and will chime in.
[Modified by Avanti, 8:10 PM 1/26/2003]
[Modified by Avanti, 8:14 PM 1/26/2003]
btw, the Corvette Black Books states that Z-51 bars were enlarged for 2000 but I don't see the sizes listed. Surely, someone has them close at hand and will chime in.
[Modified by Avanti, 8:10 PM 1/26/2003]
[Modified by Avanti, 8:14 PM 1/26/2003]
Drifting
Joined: Sep 1999
Posts: 1,431
Likes: 2
From: Munich Bavaria
Re: Swaybar install writeup done (jmX)
jmX, excellent. Thank you very much as this is gonna be my next mod. Great pictures and absolutelly question free instructions. I copied it out and will use it when doing this mod.
Beside that, anybody knows now the difference in diameter of the 97to99 Z51 bars to the Z06 bars ? Would like to know that too . . .
Jochen
Beside that, anybody knows now the difference in diameter of the 97to99 Z51 bars to the Z06 bars ? Would like to know that too . . .
Jochen
Melting Slicks
Joined: Feb 2001
Posts: 3,360
Likes: 1
From: DFW TX
Senior Member
Cruise-In III Veteran
Cruise-In IV Veteran
Re: Swaybar install writeup done (jmX)
Nice looking write up jmX, I want to replace my now squeky T1 links with the aluminum pieces if they will shut the heck up.
