Brake caliber question
Thread Starter
Melting Slicks
Joined: Aug 2007
Posts: 2,583
Likes: 415
From: Erwin, NC
Brake caliper question
Can I run C6Z front calipers and move my stock calipers to the rear? I haven’t been able to source any C6Z rear calipers.
Last edited by 99FRC Newb; Jan 23, 2024 at 09:21 PM. Reason: I hate autocorrect
Drifting
Joined: Sep 2017
Posts: 1,961
Likes: 693
From: Avon Lake OH
Can it physically be done, yes. But you will need to also use the 32mm wide 12.8" front rotor too and that will eliminate the emergency/parking brake function, not to mention also messing up the brake bias balance on the car.
As far as the C6 Z06 J56 rear calipers, have you also searched on eBay or Facebook Marketplace?
What about PowerStop remanufactured units?
https://www.summitracing.com/parts/pwr-s15044
As far as the C6 Z06 J56 rear calipers, have you also searched on eBay or Facebook Marketplace?
What about PowerStop remanufactured units?
https://www.summitracing.com/parts/pwr-s15044
Thread Starter
Melting Slicks
Joined: Aug 2007
Posts: 2,583
Likes: 415
From: Erwin, NC
Can it physically be done, yes. But you will need to also use the 32mm wide 12.8" front rotor too and that will eliminate the emergency/parking brake function, not to mention also messing up the brake bias balance on the car.
As far as the C6 Z06 J56 rear calipers, have you also searched on eBay or Facebook Marketplace?
What about PowerStop remanufactured units?
https://www.summitracing.com/parts/pwr-s15044
As far as the C6 Z06 J56 rear calipers, have you also searched on eBay or Facebook Marketplace?
What about PowerStop remanufactured units?
https://www.summitracing.com/parts/pwr-s15044
I will check out the PowerStop ones as well! I didn't know they existed.
