TPIS headers questions
Thread Starter
Pro
Joined: Aug 2002
Posts: 738
Likes: 0
From: Olathe KS
TPIS headers questions
Will TPIS headers off a 01 fit on a 02? Second I have an X pipe already is the H pipe that comes with the TPIS needed? Last how would these connect to my stock cat pipe (on the 02) without the H pipe? do they just need clamps or would they need to be welded permanently? Any info would be appreciated.
Thanks,
Marc
Thanks,
Marc
Drifting
Joined: Sep 2000
Posts: 1,456
Likes: 5
From: Bothell WA
Re: TPIS headers questions (mods to come)
I'm pretty sure that the TPIS headers off an '01 will fit an '02. The H pipe that comes with the TPIS headers is used to connect the headers to the rest of the stock exhaust. The header collector slides into the H pipe. The H pipe is welded to the front of the stock cats. The slip fit allows you to take apart the system easily. I chose to use the H pipe on my car along with the X pipe I already had after the cats. I know there are others on this forum that haven't used the H pipe. Its your preference.
- Mark
- Mark
Premium Supporting Vendor
Joined: Jan 2001
Posts: 17,681
Likes: 11
From: Central Jersey
Cruise-In II Veteran
Cruise-In III Veteran
Cruise-In V Veteran
Re: TPIS headers questions (mods to come)
01 and 02 are the same. You will need the h-pipe that comes with the TPIS headers in order to connect the factory center section to the headers. you can still use an x-pipe though :seeya
