HVAC control head dual zone schematic?
Thread Starter
Heel & Toe
Joined: Mar 2026
Posts: 19
Likes: 0
HVAC control head dual zone schematic?
Anyone out there have a schematic to the hvac control head? I replaced my 14 backlight bulbs with regular halogen and they look great, but too damn bright. I want to install an inline resistor to tame down the brightness. Thanks
Tech Contributor
Joined: Jan 2007
Posts: 19,394
Likes: 1,137
From: Dyer, IN
What p/n did you use? I have seen good results with #7219 and #8111.
Last edited by lucky131969; May 14, 2026 at 02:09 PM.
Thread Starter
Heel & Toe
Joined: Mar 2026
Posts: 19
Likes: 0
[QUOTE=lucky131969;1609643053]What p/n did you use? I have seen good results with #7219 and #8111
I used halogen 3mm bulbs from eBay. There was no part/model number given. Physically, they are smaller than the stock ones.
I used halogen 3mm bulbs from eBay. There was no part/model number given. Physically, they are smaller than the stock ones.
Tech Contributor
Joined: Jan 2007
Posts: 19,394
Likes: 1,137
From: Dyer, IN
[QUOTE=Osbmxer1968;1609643762]Ok. So why not just replace with bulbs that provide proven results instead of adding another variable?
