Z06 Sway Bar Install
Thread Starter
Drifting
Joined: Sep 2001
Posts: 1,651
Likes: 0
From: Ocean County NJ
Z06 Sway Bar Install
Hi Guys...I painted my new Z06 sway bar red then installed with new metal end links instead of the sock crumby plastic ones......it originally had marks on it for where the bushings go......I should have marked them but instead measured and lost the measurements...so I just used the naked eye to judge where to place the bushings after I installed the end links and attached to cross member.......you think that is good enough???? It looks evenly spaced with relation to the end links positioned vertically......or is this something crucial to handling????
One day I will learn that less is more....I should have just put em on the car blk instead of sanding and spraying red....lol :yesnod:
One day I will learn that less is more....I should have just put em on the car blk instead of sanding and spraying red....lol :yesnod:
Team Owner
Joined: Apr 2001
Posts: 36,453
Likes: 2
From: Overwhelmed as one would be, placed in my position.... DFW, TX
St. Jude Donor '05
Re: Z06 Sway Bar Install (skidmarc)
They'll work themselves out, I think. As long as they're not waaaaaay off, you should be OK.
Safety Car
Joined: May 2000
Posts: 4,408
Likes: 61
From: Centerville OH "If we weren't all crazy we would go insane"
CI 3-4-5-6-7 & 9 Veteran
St. Jude Donor '08
Re: Z06 Sway Bar Install (Umrswimr)
They'll work themselves out, I think. As long as they're not waaaaaay off, you should be OK.
Le Mans Master
Joined: Dec 2000
Posts: 9,913
Likes: 1,866
From: Hot Springs AR
Re: Z06 Sway Bar Install (Umrswimr)
They'll work themselves out, I think. As long as they're not waaaaaay off, you should be OK.
Have a good one,
Mike
