INJECTORS
Thread Starter
Pro
Joined: Sep 2002
Posts: 577
Likes: 6
From: mempho, tn
INJECTORS
AM about to put the 421 iron block together, and am trying to select an injector. cam is 242, 610 at 113, 6-speed, hydraulic, etc. have been told gm 3.8 ltr suprecharges injectors, will flow 42 lbs, and also the svo 42's/ there are choices of pintle style, disc style, not to mention lucas, delphi, etc to choose from. amy help appreciated. also, any sources to purchase from as well, thanks, joe
Safety Car
Joined: Mar 2002
Posts: 4,928
Likes: 1
Cruise-In V Veteran
St. Jude Donor '09
Re: INJECTORS (ADMIRAL JOE)
Use the GM/Bosch 42# injectors. These are the same injectors used in the Grand AM Cup Corvettes and the S/C 3800 V6 Engines. They have the same basic desgn as the stock injectors (internal coil) and therefore do NOT require a change in the Offset Table. I believe you can get them @ GMPP for around $450 for 8 inj. Good Luck! :yesnod: :thumbs:
joel( Bink) :cheers: :steering:
[Modified by binksZ06, 4:15 PM 6/6/2003]
joel( Bink) :cheers: :steering:
[Modified by binksZ06, 4:15 PM 6/6/2003]
Safety Car
Joined: Mar 2002
Posts: 4,928
Likes: 1
Cruise-In V Veteran
St. Jude Donor '09
Re: INJECTORS (kromberg)
Either way, you will need to adjust the injector flow rate table :)
Keith
Keith
joel (Bink) :cheers: :steering:
Safety Car
Joined: Mar 2002
Posts: 4,928
Likes: 1
Cruise-In V Veteran
St. Jude Donor '09
Re: INJECTORS (ADMIRAL JOE)
Here you go GMPartsDirect.com http://www.gmpartsdirect.com Search for Part # 24508208. :thumbs:
joel(Bink) :cheers: :steering:
joel(Bink) :cheers: :steering:
