C5 Tech Corvette Tech/Performance: LS1 Corvette Technical Info, Internal Engine, External Engine, Tech Topics, Basic Tech, Maintenance, How to Remove & Replace
Sponsored by:
Sponsored by:

Quick Please Help! Bilstein install!!!!!!

Old Jul 30, 2003 | 08:18 PM
  #1  
1 BAD C5's Avatar
1 BAD C5
Thread Starter
Melting Slicks
 
Joined: Nov 2002
Posts: 3,198
Likes: 0
From: Clarkesville GA
Default Quick Please Help! Bilstein install!!!!!!

I am in the middle of installing the front shocks. It appears that one of the shocks bottom mounting bracket holes are to narrow to fit into the factory holes. What do I do??? Does something get drilled or am I missing something. The other side went in fine. Thanks!!!
Reply
Old Jul 30, 2003 | 10:42 PM
  #2  
Kenny94945's Avatar
Kenny94945
Le Mans Master
25 Year Member
Liked
Loved
Community Favorite
 
Joined: Oct 2000
Posts: 6,490
Likes: 716
From: Sausalito CA
Default Re: Quick Please Help! Bilstein install!!!!!! (1 BAD C5)

the peice that runs through the shock eye to which the two bolts pass through can be moved/ twisted.

Do not drill anything.

Sometimes placing a jack under the a-arm may help align.
Reply
Old Jul 31, 2003 | 07:48 AM
  #3  
Dylan Savage's Avatar
Dylan Savage
Racer
10 Year Member
 
Joined: Mar 2003
Posts: 482
Likes: 0
From: TX
Default Re: Quick Please Help! Bilstein install!!!!!! (Kenny94945)

:iagree:

Twist it around and see what you can do, it should fit. Test-fit the bolt with the shock off the car, and if it goes through, it's just a twist-n-fit issue. If it does not go through, you know thats a badly machined/drilled shock. It's not a big problem, you should be able to re-drill it easily. I'd test it though and see where the problem lies so you don't frustrate yourself.
Reply
Old Jul 31, 2003 | 09:29 AM
  #4  
jschell's Avatar
jschell
Burning Brakes
25 Year Member
Conversation Starter
All Eyes On Me
 
Joined: Nov 2000
Posts: 1,132
Likes: 7
From: Gainesville, VA
Default Re: Quick Please Help! Bilstein install!!!!!! (Dylan Savage)

There are a few tips in here that makes it very easy.

http://www.govettego.com/mods/shocks/index.htm
Reply
Old Jul 31, 2003 | 12:35 PM
  #5  
jedicowboy's Avatar
jedicowboy
Melting Slicks
 
Joined: Jun 2002
Posts: 2,854
Likes: 1
Default Re: Quick Please Help! Bilstein install!!!!!! (1 BAD C5)

You can do it ,Captain. Let me know if they are going to send you a new one. :cool:

-Nate
Reply
Old Jul 31, 2003 | 09:03 PM
  #6  
1 BAD C5's Avatar
1 BAD C5
Thread Starter
Melting Slicks
 
Joined: Nov 2002
Posts: 3,198
Likes: 0
From: Clarkesville GA
Default Re: Quick Please Help! Bilstein install!!!!!! (jedicowboy)

Well it turns out the shock has a defect from the factory. The mounting plate should be approx. 3 1/2" across, the one I have is 3 3/16. Almost a 1/4 off :mad That is what is causing the holes not to line up on the one shock. However I called Shawn at LAPD today and they are going to ship one out today next day air. I knew I wasn't crazy.

One more thing to make my day worse yesterday, The Fed Ex guy backed over my 18' Bradford Pear Tree breaking it off at the ground. :mad So needless to say I was on the phone immediately to Fed Ex to get a claim in. They were very helpful and are going to pay for a new tree. Estimates are about 200-250 dollars. I bet the guy will be more careful next time he backs up.
Reply
Old Jul 31, 2003 | 10:31 PM
  #7  
jedicowboy's Avatar
jedicowboy
Melting Slicks
 
Joined: Jun 2002
Posts: 2,854
Likes: 1
Default Re: Quick Please Help! Bilstein install!!!!!! (1 BAD C5)

:cool:
Reply
Old Aug 1, 2003 | 02:24 AM
  #8  
bgood's Avatar
bgood
Drifting
Supporting Lifetime
20 Year Member
Liked
Loved
Community Favorite
 
Joined: Jul 2002
Posts: 1,386
Likes: 80
From: NC
Cruise-In IV Veteran
St. Jude Contributor
Default Re: Quick Please Help! Bilstein install!!!!!! (1 BAD C5)

However I called Shawn at LAPD today and they are going to ship one out today next day air. I knew I wasn't crazy.
I thought the Bilstein shocks had to be shipped ground due to their being gas filled. :confused:
Reply

Get notified of new replies

To Quick Please Help! Bilstein install!!!!!!

Corvette Stories

The Best of Corvette for Corvette Enthusiasts

story-0

10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years

 Joe Kucinski
story-1

How Much Horsepower Every Corvette Engine "LOST" in 1972

 Joe Kucinski
story-2

Top 10 DOs and DON'Ts for Protecting Your Convertible Top!

 Michael S. Palmer
story-3

Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!

 Joe Kucinski
story-4

150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter

 Joe Kucinski
story-5

8 Coolest Corvette Pace Cars (and Replicas) of All Time

 Verdad Gallardo
story-6

Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)

 Joe Kucinski
story-7

Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!

 Verdad Gallardo
story-8

Top 10 Corvettes Coming to Mecum Indy 2026!

 Brett Foote
story-9

Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!

 Michael S. Palmer


Thread Tools
Search this Thread

All times are GMT -4. The time now is 09:51 PM.

story-0
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years

Slideshow: 10 reasons why the C6 Z06 is still a performance benchmark after 20 years.

By Joe Kucinski | 2026-05-27 17:20:09


VIEW MORE
story-1
How Much Horsepower Every Corvette Engine "LOST" in 1972

Slideshow: How much horsepower every Corvette engine lost in 1972.

By Joe Kucinski | 2026-05-27 16:54:53


VIEW MORE
story-2
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!

Slideshow: How to Protect A Convertible Top: 10 DOs & DON'Ts

By Michael S. Palmer | 2026-04-03 00:00:00


VIEW MORE
story-3
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!

Slideshow: The 10 most explosive Corvettes ever built based on power-to-weight ratio.

By Joe Kucinski | 2026-05-20 07:23:03


VIEW MORE
story-4
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter

Slideshow: From C1 to C8 we compare every Corvette generation by the numbers.

By Joe Kucinski | 2026-05-12 16:54:12


VIEW MORE
story-5
8 Coolest Corvette Pace Cars (and Replicas) of All Time

Slideshow: Some Corvette pace cars became collectible legends, while others perfectly captured the look and attitude of their era.

By Verdad Gallardo | 2026-05-11 09:50:51


VIEW MORE
story-6
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)

Slideshow: Ranking the top 10 Corvette engines by torque output.

By Joe Kucinski | 2026-05-05 11:58:09


VIEW MORE
story-7
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!

Slideshow: A Corvette pace car nearly matching IndyCar speeds sounds exaggerated, until you look at the numbers.

By Verdad Gallardo | 2026-05-04 20:03:36


VIEW MORE
story-8
Top 10 Corvettes Coming to Mecum Indy 2026!

Among a rather large group of them.

By Brett Foote | 2026-05-04 13:56:44


VIEW MORE
story-9
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!

Slideshow: the top 10 things Corvette owners want in the C9 Corvette

By Michael S. Palmer | 2026-04-30 12:41:15


VIEW MORE