Anyone using a Lunati Cam?
Thread Starter
Instructor
Joined: May 2003
Posts: 246
Likes: 0
From: Orlando FL
Anyone using a Lunati Cam?
I just bought a new Lunati Cam for some Stage 1 Heads I am planning on putting in my car. Specs are:
287°298° 222°230° .534".544" .314".320" 114° Sep 110° Int C/L 01°BTC 41°ABC / 53°BBC -3°ATC
Is anyone using a cam like this one, The duration is pretty high, while the lift is pretty low, so it will work with my Z06 springs :cool: I was just wondering what kind of #'s I could expect?
287°298° 222°230° .534".544" .314".320" 114° Sep 110° Int C/L 01°BTC 41°ABC / 53°BBC -3°ATC
Is anyone using a cam like this one, The duration is pretty high, while the lift is pretty low, so it will work with my Z06 springs :cool: I was just wondering what kind of #'s I could expect?
Safety Car
Joined: Aug 2000
Posts: 4,537
Likes: 84
From: St. Joseph MO
Cruise-In III Veteran
Cruise-In IV Veteran
Re: Anyone using a Lunati Cam? (fuel524)
Seems to fall somewhat inline with the ASA and Grand AM cams specs from GM. Both of these cams have been used with the 0.55" milled ZO6 aftermarket heads with no bad results.
