first dyno run
Thread Starter
Melting Slicks
Joined: Aug 2002
Posts: 2,103
Likes: 0
From: Tacoma WA your Junk Yard Dogg
first dyno run
here is the first dyno on my 2002 mods are stainless works headers,halltech cobra bridge,blackwing.....seems a little rich on the top end..but 314rwhp isnt to bad ....working on the link 
[Modified by corvette184, 7:19 PM 9/15/2003]
[Modified by corvette184, 7:19 PM 9/15/2003]
Racer
Joined: May 2001
Posts: 304
Likes: 0
From: Bryn Mawr PA
Re: first dyno run (corvette184)
You are real rich. I installed an MAFT and leaned out my 99 FRC to around 13.1 or so and my HP is now 326. My mods do not include headers! You should be around 340 or so, IMHO.
Good luck
Good luck
Thread Starter
Melting Slicks
Joined: Aug 2002
Posts: 2,103
Likes: 0
From: Tacoma WA your Junk Yard Dogg
Re: first dyno run (2C5only21)
i am going to do another dyno pull next monday....i will hook up the predator i bought and give it a try.........last time i hooked up the predato i was really lean according to the predator.....the computer tuning at home makes me nervous...i dont want to bugger anything up :crazy: :crazy: :crazy:
Drifting
Joined: Aug 2001
Posts: 1,696
Likes: 0
From: SANTA MARIA,CA. formerly Magnolia Texas
St. Jude Donor '08-'09
Re: first dyno run (corvette184)
Go to a tuner that has LS1 edit and can dyno it at the same time to check the changes and you will be VERY happy with the results! :D :lol:
jerry
[Modified by XKR100, 7:03 PM 9/15/2003]
jerry
[Modified by XKR100, 7:03 PM 9/15/2003]
