convert my carb race motor to EFI, please design the system.
10-07-2003, 06:29 AM
#1
Melting Slicks
Thread Starter
Member Since: Sep 2001
Location: Gig Harbor WA
Posts: 2,068
Likes: 0
Received 0 Likes
on
0 Posts
convert my carb race motor to EFI, please design the system.
Now that I have gutted and removed every wire under the dash and in the car, (but did save the stock under hood harness), We started talking about EFI tonight.
This is a 400 block destroked with 3.48 crank to 377 CI, Crower circle track cam, solid, fat tappet cam, big AL head motor, currently topped by a BG 750 CFM Demon carb. Approx 550 HP/ 510 tq, w 7500 rpm redline
Beside fitting better under the stock hood, are there any advantages to going to EFI
How bout disadvantages?
what do I need to convert a carb motor to an EFI system, soup to nuts and outperform the carb at every rpm level?
I know I need a stand alone puter, but we can do that, what about the hardware?
What system do I need, can an LT1 go on a stock flow motor?
design my system, I know all the parts sell relatively cheap n the classifieds
Thanks
Evan
This is a 400 block destroked with 3.48 crank to 377 CI, Crower circle track cam, solid, fat tappet cam, big AL head motor, currently topped by a BG 750 CFM Demon carb. Approx 550 HP/ 510 tq, w 7500 rpm redline
Beside fitting better under the stock hood, are there any advantages to going to EFI
How bout disadvantages?
what do I need to convert a carb motor to an EFI system, soup to nuts and outperform the carb at every rpm level?
I know I need a stand alone puter, but we can do that, what about the hardware?
What system do I need, can an LT1 go on a stock flow motor?
design my system, I know all the parts sell relatively cheap n the classifieds
Thanks
Evan
