Lowering a Z06
Thread Starter
Pro
Joined: Nov 2003
Posts: 667
Likes: 0
From: Austin TX
Lowering a Z06
I'm sure this has been answered before, and if it has please point me in the right direction. I'm looking to lower my 01 z06. I know how to do the back, but I would appreciate any help you guys could give me on doing the front.
Thanks
[Modified by jkz06, 11:01 PM 11/13/2003]
Thanks
[Modified by jkz06, 11:01 PM 11/13/2003]
Team Owner
Joined: Mar 2001
Posts: 25,013
Likes: 79
From: Manitoba/San Jose del Cabo
Cruise-In III Veteran
St. Jude Donor '11
Re: Lowering a Z06 (jkz06)
Here is one method, http://www.members.shaw.ca/superchargedvette/Tips.htm
I had another link but it seems to be down right now. :cheers:
I had another link but it seems to be down right now. :cheers:
Drifting
Joined: Jul 2002
Posts: 1,489
Likes: 165
From: Raleigh, NC
Re: Lowering a Z06 (Racer44)
Here is a nother decent How-to:
http://www.z06vette.com/diy_lower.php
Take special note of how they unload the suspension in the second pic. Also note that the third pic of the front suspension should look like this:
It is very simple once you get the hang of it :)
http://www.z06vette.com/diy_lower.php
Take special note of how they unload the suspension in the second pic. Also note that the third pic of the front suspension should look like this:
It is very simple once you get the hang of it :)
Drifting
Joined: Jul 2002
Posts: 1,489
Likes: 165
From: Raleigh, NC
Re: Lowering a Z06 (jkz06)
Take note of this thread I just posted:
http://forums.corvetteforum.com/zerothread?id=691567
Try and get an even drop all around (same amount in front as rear) if you are really concerned with ride quality. This requires leaving 4 or 5 threads showing in the rear
http://forums.corvetteforum.com/zerothread?id=691567
Try and get an even drop all around (same amount in front as rear) if you are really concerned with ride quality. This requires leaving 4 or 5 threads showing in the rear
