Magnet For Programming TPM Sensors???
Thread Starter
Intermediate
Joined: Jan 2002
Posts: 43
Likes: 0
From: Mustang Oklahoma
Magnet For Programming TPM Sensors???
Question - My C5 (01) rims will be changed to chrome rims tommorrow.
If reprogramming is needed what type magnet can be used (other than the GM magnet) to force the sensor to transmit the identification code?
I have the 2001 Service Manual that contains the procedure.
Any addtional tips would be appreciated.
Al Weidner
Triple Black Vert
If reprogramming is needed what type magnet can be used (other than the GM magnet) to force the sensor to transmit the identification code?
I have the 2001 Service Manual that contains the procedure.
Any addtional tips would be appreciated.
Al Weidner
Triple Black Vert
Race Director
Joined: Oct 2002
Posts: 16,477
Likes: 26
From: Gone
CI 6-7-8-9-10 Veteran
St. Jude Donor '03
Re: Magnet For Programming TPM Sensors??? (aweidner)
I used an old speaker that I had laying around. Worked fine.
I think even a typical refrigerator magnet might work. Otherwise pick up a decent sized magnet at a hardware store, they're cheap.
:cheers:
I think even a typical refrigerator magnet might work. Otherwise pick up a decent sized magnet at a hardware store, they're cheap.
:cheers:
Le Mans Master
Joined: Mar 2002
Posts: 5,718
Likes: 2
From: Flower Mound TX
Cruise-In V Veteran
St. Jude Contributor
Re: Magnet For Programming TPM Sensors??? (Y2Kvert4me)
I used an old speaker that I had laying around. Worked fine.
I think even a typical refrigerator magnet might work. Otherwise pick up a decent sized magnet at a hardware store, they're cheap.
:cheers:
I think even a typical refrigerator magnet might work. Otherwise pick up a decent sized magnet at a hardware store, they're cheap.
:cheers:
Racer
Joined: Nov 2001
Posts: 353
Likes: 0
From: Jonesboro AR
Re: Magnet For Programming TPM Sensors??? (joemoia)
I used the base from one of those mag mount lights with the goose neck. The light was broken so I took the goose neck off. The hole was just big enough to fit over the valve stem. The only problem I had was with the last sensor (LR) didn't want to learn. A couple of weekends ago the temp got to over 60* and they all 4 finally learned. My keyless entry/pressure sensor computer doesn't work well when its cold. Bad connection I suspect. :cheers:
Thread Starter
Intermediate
Joined: Jan 2002
Posts: 43
Likes: 0
From: Mustang Oklahoma
Re: Magnet For Programming TPM Sensors??? (rhoeven)
Thanks to all for the magnet info.
Chrome wheels were mounted and old sensors were installed on chrome wheels earlier today.
I had the tire personel make sure the sensors were installed on wheels that were going back to the sensors original location.
I had a magnet and the reprogramming instructions with me, but reprogramming was not needed.
Thanks again
Chrome wheels were mounted and old sensors were installed on chrome wheels earlier today.
I had the tire personel make sure the sensors were installed on wheels that were going back to the sensors original location.
I had a magnet and the reprogramming instructions with me, but reprogramming was not needed.
Thanks again
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
