Hello from AP-Egineering
Thread Starter
Advanced
Joined: Feb 2004
Posts: 69
Likes: 0
From: Clinton Township MI
Hello from AP-Egineering
Hello,
This is Brian from AP-Engineering. I Just wanted say hello to everyone , and hope to be able to bring you great service at a great price. We have been in buisness for 6 years now and have worked on many C4 and C5 corvettes . We are a full service shop that can sell and install anything from an air filter to an AP-Engineering 427. We have a MD-250 chassis dyno , 2 hoists , 2 engine builders, 2 technitions and a web site located at automotiveperformance.net.
Thank you
Brian
Automotiveperformance.net
586-954-3181
[Modified by Brian@ap-engineering, 5:04 PM 2/5/2004]
This is Brian from AP-Engineering. I Just wanted say hello to everyone , and hope to be able to bring you great service at a great price. We have been in buisness for 6 years now and have worked on many C4 and C5 corvettes . We are a full service shop that can sell and install anything from an air filter to an AP-Engineering 427. We have a MD-250 chassis dyno , 2 hoists , 2 engine builders, 2 technitions and a web site located at automotiveperformance.net.
Thank you
Brian
Automotiveperformance.net
586-954-3181
[Modified by Brian@ap-engineering, 5:04 PM 2/5/2004]
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Safety Car
Joined: May 2003
Posts: 3,814
Likes: 105
From: Dearborn Heights Michigan
Re: Hello from AP-Egineering (93Polo)
APE did my 00 C5 Coupe head/cam/tune about 2 yrs. ago. Good shop. Car runs like a scalded dog. Small problem with the crank pulley last year that may or may not have been the shop's fault.
Fred K. :auto:
Fred K. :auto:
Burning Brakes
Joined: Nov 1999
Posts: 901
Likes: 83
From: Los Angeles
Re: Hello from AP-Egineering (Dave00C5)
Awesome to have a local tuner. Those guys in Tx have it easy.
The two very knowledgeable guys who wrenched in my cam (Tom/Tim) spoke very highly of your shop & said that you were always very busy (that must be good). And that is a good price on heads.
I am looking forward to getting my car over for some tuning & addl work. Evidently one of your "shop cars" is a black FRC.
I like that model.
The two very knowledgeable guys who wrenched in my cam (Tom/Tim) spoke very highly of your shop & said that you were always very busy (that must be good). And that is a good price on heads.
I am looking forward to getting my car over for some tuning & addl work. Evidently one of your "shop cars" is a black FRC.
I like that model.
Racer
Joined: Mar 2003
Posts: 457
Likes: 0
From: albany ny
Re: Hello from AP-Egineering (vetterdstr)
APE is putting a 408 together for me right now. You cant beat thier prices. :rofl: They are pretty popular over on LS1TECH if you want to check them out. :yesnod:
[Modified by ITSovr4U, 8:20 PM 2/5/2004]
[Modified by ITSovr4U, 8:20 PM 2/5/2004]
Thread Starter
Advanced
Joined: Feb 2004
Posts: 69
Likes: 0
From: Clinton Township MI
Re: Hello from AP-Egineering (ITSovr4U)
Thank you for the nice welcome ,guys and gals...... :seeya
And rest assured, the engines we build are not cheaply made and low quality. Some of you might know our owner/engine builder Chris Gelineau. He was the Chris at Katech in charge of thier C5R program and thier complete ls1 street program as well. Some of the rest of you know him as Chris from Diamond pistons where he started and maintained thier ls1 piston program.
Hes the only person i know that has build 700 hp ls1's that have lasted 24 hrs at 180 mph. :D
Thank you again for the nice welcome. If anybody needs anything at all please feel free to call us at 586-954-3181 or e-mail us at apengineering2@yahoo.com.
And rest assured, the engines we build are not cheaply made and low quality. Some of you might know our owner/engine builder Chris Gelineau. He was the Chris at Katech in charge of thier C5R program and thier complete ls1 street program as well. Some of the rest of you know him as Chris from Diamond pistons where he started and maintained thier ls1 piston program.
Hes the only person i know that has build 700 hp ls1's that have lasted 24 hrs at 180 mph. :D
Thank you again for the nice welcome. If anybody needs anything at all please feel free to call us at 586-954-3181 or e-mail us at apengineering2@yahoo.com.
Premium Supporting Vendor
Joined: Jan 2001
Posts: 17,681
Likes: 11
From: Central Jersey
Cruise-In II Veteran
Cruise-In III Veteran
Cruise-In V Veteran
Re: Hello from AP-Egineering (Brian@ap-engineering)
Ohhh, so that where Chris went to.. :) Tell him I said hello and we wish him and his company the best of luck. He was a pleasure to deal with at Diamond. :seeya :seeya :seeya