I need Chicago area Tuner recommendations??
Safety Car
Joined: Feb 2003
Posts: 3,865
Likes: 0
From: Chicago il
Re: I need Chicago area Tuner recommendations?? (Razmo)
there are tuners all over the place, I was really imprressed with pwerhouse in orland park, but there are a couple of others that are supporting vendors that ive heard great things about as well
Thread Starter
Racer
Joined: Apr 2003
Posts: 349
Likes: 0
From: Chicago IL
Re: I need Chicago area Tuner recommendations?? (Monster231)
How do I find these Tuners that are located all over the place?
I know of D&M and Performance Technical Center. Any others you can think of?
I know of D&M and Performance Technical Center. Any others you can think of?
Melting Slicks
Joined: Aug 2003
Posts: 2,012
Likes: 1,352
From: Des Plaines, Il
Re: I need Chicago area Tuner recommendations?? (Razmo)
http://www.ls1speed.com is one.
I think melrose t-tops does vette work.
There is another one up north too.
Dont know really who to reccomend though. Depends on the scope of what you have planned.
[Modified by Midwayman, 3:35 PM 2/17/2004]
[Modified by Midwayman, 3:35 PM 2/17/2004]
I think melrose t-tops does vette work.
There is another one up north too.
Dont know really who to reccomend though. Depends on the scope of what you have planned.
[Modified by Midwayman, 3:35 PM 2/17/2004]
[Modified by Midwayman, 3:35 PM 2/17/2004]
Le Mans Master
Joined: Sep 2000
Posts: 6,101
Likes: 44
From: ABQ NM
Cruise-In II Veteran
Re: I need Chicago area Tuner recommendations?? (Razmo)
Powerhouse in Orland Park, PTC in Elk Grove Village, HP Performance in Mundelein, FLP in Naperville, LS1Speed in Schaumburg -I'm sure I'm leaving some out (and I think I have their names and locations of those I mentioned correct). In addition vettetech81 (I think that's correct) works out of a shop in Westmont. Try posting this query over in Great Lakes, and don't forget Vettefest at McCormick Place in March; I'll bet that a lot of the shops will be there :cheers:
[Modified by wamara, 3:52 PM 2/17/2004]
[Modified by wamara, 3:52 PM 2/17/2004]
Melting Slicks
Joined: Jun 2001
Posts: 3,123
Likes: 3
From: Orland Park Illinois
St. Jude Donor '06-'07
Re: I need Chicago area Tuner recommendations?? (Monster231)
:iagree: w/ Monster231. Know several people from our Corvette club who have had work done by Powerhouse. They do good work w/ fair prices. :yesnod:
Burning Brakes
Joined: May 2002
Posts: 818
Likes: 0
From: The Nether Region IL
Re: I need Chicago area Tuner recommendations?? (BiggieBoy)
:iagree: w/ Monster231. Know several people from our Corvette club who have had work done by Powerhouse. They do good work w/ fair prices. :yesnod:
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Burning Brakes
Joined: Dec 1999
Posts: 1,132
Likes: 40
From: Cedar Falls IA.
Cruise-In III Veteran
St. Jude Contributor '04
Re: I need Chicago area Tuner recommendations?? (Razmo)
FLP- Finish Line Performance, in Naperville. They are a vendor here on the forum. Great guys for tuning, Dan really knows his stuff, and the price was great!!
Eric
Eric
Pro
Joined: Sep 2003
Posts: 699
Likes: 0
From: Downers Grove, IL
St. Jude Donor '07
Re: I need Chicago area Tuner recommendations?? (Razmo)
Guys,
I need some direction on the best place to bring my baby for maintence, engine upgrades, & etc..
Thanks
I need some direction on the best place to bring my baby for maintence, engine upgrades, & etc..
Thanks
-Brendan
[Modified by yankee0304, 12:51 PM 2/18/2004]
