G5X2 cam help....
Thread Starter
Instructor
Joined: Sep 2003
Posts: 119
Likes: 0
From: Friendswood TX
G5X2 cam help....
Is there some where I can find some good info on this cam. I have looked on LGM's web site but not a lot of info there. And does anyone have any clips of this cam at idle. Thanks Shane
Melting Slicks
Joined: Dec 2001
Posts: 2,877
Likes: 0
From: Texas
Re: G5X2 cam help.... (WideopenC5)
This is Scott's (brialex42) 'vette.
G5X2 Idle
232/240 .595/.607 112 LSA
I'm thinking about upgrading to the G5X3. Here's a clip of JRod running Tommy 3 gun 'vette at the shoot out.......
JRod 10.67 run
Sounds :reddevil
[Modified by SvenOdin, 9:52 PM 2/23/2004]
G5X2 Idle
232/240 .595/.607 112 LSA
I'm thinking about upgrading to the G5X3. Here's a clip of JRod running Tommy 3 gun 'vette at the shoot out.......
JRod 10.67 run
Sounds :reddevil
[Modified by SvenOdin, 9:52 PM 2/23/2004]
Drifting
Joined: Jul 2000
Posts: 1,818
Likes: 3
From: SoCal
Re: G5X2 cam help.... (SvenOdin)
Did somebody say that JROD was running the G5x3 at the shootout? I saw it asked a few times but never saw a confirmation. Granted, I didnt read every post of the bajillion threads out there, but from the sounds of it, it sounded a lot more aggressive than the g5x3 i heard idle.
Melting Slicks
Joined: Feb 2001
Posts: 3,360
Likes: 1
From: DFW TX
Senior Member
Cruise-In III Veteran
Cruise-In IV Veteran
Re: G5X2 cam help.... (jmX)
Did somebody say that JROD was running the G5x3 at the shootout? I saw it asked a few times but never saw a confirmation. Granted, I didnt read every post of the bajillion threads out there, but from the sounds of it, it sounded a lot more aggressive than the g5x3 i heard idle.
FYI there is a link to a video in my sig...
[Modified by Godspeed, 12:41 AM 2/24/2004]
Instructor
Joined: Feb 2004
Posts: 159
Likes: 0
Re: G5X2 cam help.... (Godspeed)
Here is another G5-X2 on a 112 at idle.....a cold idle.
http://www.thebestgen.com/images/yellowz06idle.WMV
http://www.thebestgen.com/images/yellowz06idle.WMV
