Halltech experience !
Thread Starter
Burning Brakes
Joined: Aug 2001
Posts: 1,076
Likes: 0
From: Lake Forest CA
Halltech experience !
It was my good fortune to meet up with Jim Hall today. It was a chance visit to have a look at his awsome Twin Turbo Z06. He offered to give me a ride & I respectfully refused .Knowing full well what a pair of Turbos can do for a V8. So he then handed me the keys & allowed me to drive it. My friends this car is insane. I never thought that there could be such a thing as too much horsepower. IF your ever in his nighborhood you need to check it out. While I was there he also reprogrammed my new Z06 after a Header install & one of his Trap ram air cleaner set ups. Car runs great. The man knows his stuff. What a great way to spend a Sat afternoon. I'm impressed :hurray:
[Modified by turbolou, 8:08 PM 3/13/2004]
[Modified by turbolou, 8:08 PM 3/13/2004]
Le Mans Master
Joined: Jan 2003
Posts: 6,298
Likes: 0
From: Tyler TX
Re: Halltech experience ! (turbolou)
It was my good fortune to meet up with Jim Hall today. It was a chance visit to have a look at his awsome Twin Turbo Z06. He offered to give me a ride & I respectfully refused .Knowing full well what a pair of Turbos can do for a V8. So he then handed me the keys & allowed me to drive it. My friends this car is insane. I never thought that there could be such a thing as too much horsepower. IF your ever in his nighborhood you need to check it out. While I was there he also reprogrammed my new Z06 after a Header install & one of his Trap ram air cleaner set ups. Car runs great. The man knows his stuff. What a great way to spend a Sat afternoon. I'm impressed :hurray:
[Modified by turbolou, 8:08 PM 3/13/2004]
[Modified by turbolou, 8:08 PM 3/13/2004]
Supporting Vendor
Joined: Mar 2002
Posts: 13,099
Likes: 672
From: Bristol, Tennessee
St. Jude Donor '09
Re: Halltech experience ! (EFI-1)
I don't hand the keys to 700 HP to many. So far: Andy at A&A. Shinobi. and Turbo Lou.
Lou is being modest. Lou's has done pretty well driving a Turbo Buick GN http://www.gnttype.org/members/Hof102.html
3rd Place: 3 Lou Czarnota from Lake Forest, CA 87 Regal 8.63@157 1.24 60 ft.
He is also a friendly competitor of the "Turbo Guru" Ken Duttweiler.
Talk about turbo gurus, check out Turbo Lou's website:
http://www.geocities.com/turbolou_2000
Jim Hall
Lou is being modest. Lou's has done pretty well driving a Turbo Buick GN http://www.gnttype.org/members/Hof102.html
3rd Place: 3 Lou Czarnota from Lake Forest, CA 87 Regal 8.63@157 1.24 60 ft.
He is also a friendly competitor of the "Turbo Guru" Ken Duttweiler.
Talk about turbo gurus, check out Turbo Lou's website:
http://www.geocities.com/turbolou_2000
Jim Hall
Thread Starter
Burning Brakes
Joined: Aug 2001
Posts: 1,076
Likes: 0
From: Lake Forest CA
Re: Halltech experience ! (Jim Hall)
thanks Jim I wasn't suggesting that you hand the keys to your ( other woman) to just anyone LOL & as far as Ken Duttwieler goes I have a lot of admiration & respect for the man & dont consider myself quite in his league. See you Sat. Regards Lou
Supporting Vendor
Joined: Mar 2002
Posts: 13,099
Likes: 672
From: Bristol, Tennessee
St. Jude Donor '09
Re: Halltech experience ! (EFI-1)
You got to drive the TT? I'm going to have to fly over and visit his shop for the thrill ride alone! :lol: :cheers:
Jim
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Heel & Toe
Joined: Feb 2004
Posts: 19
Likes: 0
From: huntington beach ca
Re: Halltech experience ! (Jim Hall)
I also would like to thank Jim for my Trap, Tune and borla installed on my Z. My Goodyears are begging to be changed out for some BFG DRs. Thanks again Jiim. Going to Donut Derelicts tomorrow morning, maybe Ill see you there. Wade :cool:
Supporting Vendor
Joined: Mar 2002
Posts: 13,099
Likes: 672
From: Bristol, Tennessee
St. Jude Donor '09
Re: Halltech experience ! (z06trouble3)
Tomorrow, we are prototyping a new oil cooler/remote oil filter setup. If all goes well, we will have this kit available soon.
All billet components, with a Setrab 19 row oil cooler and 8 micron 6.5" remote filter, XRP stainless hose and AN-8 fittings. All the best.
We are going to mark this kit up very little, and keep it factory direct to keep the cost down.
Jim
All billet components, with a Setrab 19 row oil cooler and 8 micron 6.5" remote filter, XRP stainless hose and AN-8 fittings. All the best.
We are going to mark this kit up very little, and keep it factory direct to keep the cost down.
Jim
Supporting Vendor
Joined: Mar 2002
Posts: 13,099
Likes: 672
From: Bristol, Tennessee
St. Jude Donor '09
Re: Halltech experience ! (Vortech C5)
These pics are not of our car, but give you the idea of the quality of the parts.
I will have a new thread tomorrow, showing off the new kit.
Jim
Supporting Vendor
Joined: Mar 2002
Posts: 13,099
Likes: 672
From: Bristol, Tennessee
St. Jude Donor '09
Re: Halltech experience ! (Vortech C5)
Thanks Ray, you should show off your Vortech Covers we did for you some time. I was pretty proud to see them in the Vortech display at SEMA.
Jim
Jim