<<Need Some Help!!!>>
Thread Starter
Melting Slicks
Joined: Sep 2002
Posts: 2,787
Likes: 139
From: Las Vegas NV
<<<<<<<Need Some Help!!!>>>>>>>
Can anyone tell me how to adjust or fix loose windows my windows are really loose when you open the door and grab the windows at the top. its causeing a air leak at the doors I have already replaced the all the seals. I thought that would do it but no joy. I brought it to the dealer and they adjusted the windows to go up more but that didnt help eather. I think the windows being loose is causing it from the door shuting is pushing the windows out some and causeing not to make a goos seal. Thanks for any help with this problem guys/girls. :chevy
Team Owner
Joined: Jul 1999
Posts: 50,808
Likes: 9
From: Buy USA products! Check the label! Employ Americans
Re: <<<<<<<Need Some Help!!!>>>>>>> (razor2430)
There is an adjustment for in and out at the bottom but it's been years since I have done it. Down by the reflector in the door. It's called tip in adjustment. Go to an good autobody.
[Modified by John Shiels, 6:13 PM 3/26/2004]
[Modified by John Shiels, 6:13 PM 3/26/2004]
Tech Contributor
Joined: May 2003
Posts: 7,035
Likes: 134
From: North Augusta, SC
Re: Need Some Help!!!(John Shiels)
Here's a link to a good version of the window tip in adjustment. You don't need the inverted torx socket, a small 6-point or just a pair of pliers will work fine.
. http://www.c5forum.com/cgi-bin/ultim...c;f=1;t=000948
.
:cheers:
. http://www.c5forum.com/cgi-bin/ultim...c;f=1;t=000948
.
:cheers:
