G5X-3 cam and nitrous
Thread Starter
Drifting
Joined: Dec 2002
Posts: 1,472
Likes: 1
From: Reynoldsburg oh
G5X-3 cam and nitrous
I am thinking on goin with the X-3 cam. the question is that will this cam be ok with stock head and the nitrous. Also will I need to (fly cut???) the heads for this cam?
[Modified by sprayedc5, 8:11 PM 5/15/2004]
[Modified by sprayedc5, 8:11 PM 5/15/2004]
Melting Slicks
Joined: Feb 2001
Posts: 3,360
Likes: 1
From: DFW TX
Senior Member
Cruise-In III Veteran
Cruise-In IV Veteran
Re: G5X-3 cam and nitrous (sprayedc5)
Yes and yes. The G5X-3/114 we run with the stock heads and it just slides right in, no need to flycut the pistons. It also works great on nitrous!
Melting Slicks
Joined: Jan 2001
Posts: 2,635
Likes: 2
From: Aloha, Oregon
Re: G5X-3 cam and nitrous (Godspeed)
Lou made mention that they are experimenting with installing an X3 112lsa cam into a stock motor (unmilled heads, stock thickness gaskets) to see if will clear without flycutting pistons. I hope so. I have several customer's wishing for a cam only install and tune into their stock motors. May have to go 113 or 114lsa. Any of these cams will work awesome with nitrous.
Robert http://www.gen3motorsports.com
Robert http://www.gen3motorsports.com
