TPIS headers question
Drifting
Joined: Sep 2000
Posts: 1,456
Likes: 5
From: Bothell WA
Re: TPIS headers question (blc09)
The shop that installed mine recommended high quality copper gaskets. I don't know who makes them specifically, but they have worked great for the 1 1/2 years I've had the headers on my car. No leaks or any other types of problems.
- Mark
- Mark
Melting Slicks
Joined: Oct 2001
Posts: 2,075
Likes: 0
From: Central NJ
Re: TPIS headers question (Mark VerMurlen)
I used the stock GM gaskets on the last set of TPIS I installed. If the flanges aren't warped you won't have a problem :yesnod: The only set of headers I had trouble with was an early set of FLPs, the flanges were very warped and needed a thick gasket to seal properly. The headers were replaced with a newer set of FLPs and the stock GM gaskets were used without incident.
