putting in HUD
Drifting
Joined: May 2001
Posts: 1,726
Likes: 1
From: COCOA Florida
Re: putting in HUD (gymrat)
it is a weekend project...not really hard at all once you get past the THOUGHTof taking the dash apart. you have to remove the console trim, knee pad, instrument cluster screws and sometime lower the steering column ( although I did not lower it ) there are instructions under the tools, c5 tech tips and also some vendors have good instructions that are for installing the gauge bezels...it is the same extent you have to do..only difference you need to drill and cut your dash in addition to installing the cluster. hope this helps.
tom
[Modified by C4TOMCAT, 5:32 AM 6/27/2004]
tom
[Modified by C4TOMCAT, 5:32 AM 6/27/2004]
Pro
Joined: Mar 2002
Posts: 527
Likes: 0
From: Colchester VT
Re: putting in HUD (gymrat)
Here are some very good instructions that I used. The worst part was drilling those two holes for the projector down in the corner of the windshield. Mine came out great and I love it! Good Luck! 
http://joshker99.home.comcast.net/hudinstall2.htm
http://joshker99.home.comcast.net/hudinstall2.htm
