Looking for writeup on pulling transmission - M6
1) Remove center console and shifter
2) Ubolt Shifter mounts
3) Raise car via lift or jackstands
4) Remove rear wheels
5) Remove exhaust(center section back)
6) Unbolt rear shocks and suspension to facilitate removal of suspension cradle
7) Unbolt rear diff carrier mounts to suspension cradle
8) Unbolt rear carrier/center section/suspension cradle
9) Support rear diff/tranny
10) Remove rear cradle
11) Lower diff/tranny to reference point
12) Bolt tranny/diff to tranny jack
13) Unbolt tranny from torque tube
14) Slide tranny rearward 2-4"
15) Remove pin for shifter on top side of tranny
16) Remove tranny
Process: 2-3 hours
Phillip



Pictures would be good too. Thanks
