4.10 gears at ECS
Thread Starter
Premium Supporting Vendor
Joined: Jan 2001
Posts: 17,681
Likes: 11
From: Central Jersey
Cruise-In II Veteran
Cruise-In III Veteran
Cruise-In V Veteran
4.10 gears at ECS
We are running a special since we just received a bunch of 4.10 gear sets. Price will include full installation, building of the rear and new axle seals installed with all fluids. We can also offer the 3.90 and 3.73 gear sets. Price for the swap is $1,149.00 complete. Add $100 for automatic programming.
Add $295.00 for a hardened output shaft.
Feel free to call with any questions..
Add $295.00 for a hardened output shaft.
Feel free to call with any questions..
__________________
Home of the Fastest Supercharged C5 8.4 @ 158mph
Home of the Fastest Supercharged IRS GTO 9.0@ 155
Home of the Fastest Supercharged C6 9.7 @ 143mph
Proud Sponsor of the ECS Corvette Challenge
http://www.corvettechallenge.info
609-752-0321
Home of the Fastest Supercharged C5 8.4 @ 158mph
Home of the Fastest Supercharged IRS GTO 9.0@ 155
Home of the Fastest Supercharged C6 9.7 @ 143mph
Proud Sponsor of the ECS Corvette Challenge
http://www.corvettechallenge.info
609-752-0321
Thread Starter
Premium Supporting Vendor
Joined: Jan 2001
Posts: 17,681
Likes: 11
From: Central Jersey
Cruise-In II Veteran
Cruise-In III Veteran
Cruise-In V Veteran
Originally Posted by jmzvet
Can you install 4.10s in a 2.73 case?
Feel free to give us a call. 609-752-0321 thanks
Pro
Joined: Sep 2003
Posts: 564
Likes: 0
From: Cary NC
Originally Posted by CHRIS NJ C5
We have in the past,but we decided not to continue.We can help you with a core if nec.
Feel free to give us a call. 609-752-0321 thanks
Feel free to give us a call. 609-752-0321 thanks
I have 4.10's with a hardened half shaft, but it is a bit to much gear with my Vortech SC setup in the 1/4 mile. What can I get a 3.90 differential with hardened half shaft for and how much is the core?
Thx
Richard
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Le Mans Master
Joined: Nov 2003
Posts: 8,004
Likes: 250
From: Tampa Fl
St. Jude Donor '12-'13-'14
what gears are best for MN6, y2k, vararam, ls6 manifold, 175 thermo, kooks LT headers, high flow cats with x-pipe, ghl exhaust. I have a tr224 cam, but im not sure what to do with it. rest assured , it a drive a half hour for gears, the cam with go in to.
How much for ls1edit dyno tune
How much for ls1edit dyno tune
Drifting
Joined: Nov 2001
Posts: 1,791
Likes: 0
From: NE PA
Originally Posted by phils C5 vette
what gears are best for MN6, y2k, vararam, ls6 manifold, 175 thermo, kooks LT headers, high flow cats with x-pipe, ghl exhaust. I have a tr224 cam, but im not sure what to do with it. rest assured , it a drive a half hour for gears, the cam with go in to.
How much for ls1edit dyno tune
How much for ls1edit dyno tune
Thread Starter
Premium Supporting Vendor
Joined: Jan 2001
Posts: 17,681
Likes: 11
From: Central Jersey
Cruise-In II Veteran
Cruise-In III Veteran
Cruise-In V Veteran
Originally Posted by phils C5 vette
what gears are best for MN6, y2k, vararam, ls6 manifold, 175 thermo, kooks LT headers, high flow cats with x-pipe, ghl exhaust. I have a tr224 cam, but im not sure what to do with it. rest assured , it a drive a half hour for gears, the cam with go in to.
How much for ls1edit dyno tune
How much for ls1edit dyno tune
for a n/a car I would go with 4.10's. The drivabillity is good and basicly makes 6th gear usable.
As far as cam pricing etc. give a call and we will disscuss options!
609-752-0321
Burning Brakes
Joined: Nov 2003
Posts: 1,120
Likes: 0
From: Ypsilanti MI
Chris...
Is there a difference between your 4.10 gears and DTE's 4.10 gears? I'm planning on purchasing these soon and I'm wondering because of the price difference between the two. Also I've heard people talking about some vendors gears making noises.
Melting Slicks
Joined: Dec 2000
Posts: 2,204
Likes: 5
From: Bethlehem PA
St. Jude Donor '03-'05-'06-'08-'10
Guys, Chris did my 4.10s/hardened shaft well over a year ago and after several trips to the track on DRs, they are quiet and I love what they do for my car. MN6+4.10s+ECS install=
Joe
Joe
Last edited by C54FUN; Aug 28, 2004 at 07:51 PM.
Thread Starter
Premium Supporting Vendor
Joined: Jan 2001
Posts: 17,681
Likes: 11
From: Central Jersey
Cruise-In II Veteran
Cruise-In III Veteran
Cruise-In V Veteran
Originally Posted by MikeJamesC5
Is there a difference between your 4.10 gears and DTE's 4.10 gears? I'm planning on purchasing these soon and I'm wondering because of the price difference between the two. Also I've heard people talking about some vendors gears making noises.