going to do the pcv filter/catchcan mod , questions

Reply Subscribe

Thread Tools

Search this Thread

Nov 5, 2004 | 05:32 PM

gsxrjack

Thread Starter

Burning Brakes

Joined: Oct 2003

Posts: 816

Likes: 0

From: peabody ma

going to do the pcv filter/catchcan mod , questions

DUH, where the heck is the pcv valve on my 2000 coupe :o ...I bought a new pcv valve and was going to install an oil seperator to the line, but ill be dammed if i can find the pcv valve.......thanks
jack

Nov 5, 2004 | 06:33 PM

LoneStarFRC

Team Owner

Joined: May 2001

Posts: 36,836

Likes: 244

From: Dear Karma, I have a list of people you missed.

St. Jude Donor '08-'09-'10-'11-'12-'13-'14-'15-'16

Quote:

Originally Posted by gsxrjack

It's inside the "fat" part of the black rubber line running to your TB. FYI, it may be a little difficult to remove from the rubber without damaging the rubber. The little strap that attaches to a stud on the coolant crossover pipe, has a circular metal part going around the actual pcv valve inside the rubber on the other end. You may have to work at it a bit to get the old pcv valve out. The bottom (larger end) of the pcv may even be glued to the inside of the rubber on the very bottom end of the valve, so like I said, go slowly and you should be able to get it out. The purpose of the little cable clamp feature is to conduct heat up to the pcv valve to prevent condensation from forming into sludge, etc inside the valve itself. HTH

Robert

Nov 5, 2004 | 07:24 PM

Patches

Team Owner

Joined: Sep 2001

Posts: 23,283

Likes: 906

From: Lake Elsinore, CA

You can see it in the inset below.

Nov 5, 2004 | 07:39 PM

gsxrjack

Thread Starter

Burning Brakes

Joined: Oct 2003

Posts: 816

Likes: 0

From: peabody ma

ahhhh, thanks a million guys.....

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last

Forum Jump