ECS 525HP Complete Package
Thread Starter
Premium Supporting Vendor
Joined: Jan 2001
Posts: 17,681
Likes: 11
From: Central Jersey
Cruise-In II Veteran
Cruise-In III Veteran
Cruise-In V Veteran
ECS 525HP Complete Package
We wanted to offer our customers a complete turn key head and cam package that will take a stock car and add approximately 100-150 rwhp (depending on vechicle) and offer all the necessary bolt on parts. This package also comes with all the items needed to strengthen the drive train for 1/4 mile racing or heavy street use. Included in this package is basically everything needed to run 10's in the quarter mile. Since this package is priced assuming the car is factory stock, feel free to call and discuss diccounts on any part you might have already installed.
AFR ported and polished 205cc heads
2.02 1.6 Stainless valves
Comp Cams 921 springs and titanium retainers
Custom grind cam
Ported oil pump
ARP head studs
Underdrive pully with new belts
160 degree thermostat
ported throttlebody
30 lb injectors
Double roller timing chain
ECS Custom dyno tuning
Kooks or LGM stainless headers with high flow cats and X-pipe
Borla Stinger cat back system
Exedy Duel Disk clutch
Vararam intake system
4.10 gears
DTE hardened output shaft
DTE Transmission brace
Total package price $12,495 for 6-speeds
A4 cars will receive a Yank SS3600 converter and 3.42 or 3.73 gears with hardened output shaft.
A4 price $11,495
Any questions on anything, please feel free to call us at the shop..
609-752-0321
AFR ported and polished 205cc heads
2.02 1.6 Stainless valves
Comp Cams 921 springs and titanium retainers
Custom grind cam
Ported oil pump
ARP head studs
Underdrive pully with new belts
160 degree thermostat
ported throttlebody
30 lb injectors
Double roller timing chain
ECS Custom dyno tuning
Kooks or LGM stainless headers with high flow cats and X-pipe
Borla Stinger cat back system
Exedy Duel Disk clutch
Vararam intake system
4.10 gears
DTE hardened output shaft
DTE Transmission brace
Total package price $12,495 for 6-speeds
A4 cars will receive a Yank SS3600 converter and 3.42 or 3.73 gears with hardened output shaft.
A4 price $11,495
Any questions on anything, please feel free to call us at the shop..
609-752-0321
__________________
Home of the Fastest Supercharged C5 8.4 @ 158mph
Home of the Fastest Supercharged IRS GTO 9.0@ 155
Home of the Fastest Supercharged C6 9.7 @ 143mph
Proud Sponsor of the ECS Corvette Challenge
http://www.corvettechallenge.info
609-752-0321
Home of the Fastest Supercharged C5 8.4 @ 158mph
Home of the Fastest Supercharged IRS GTO 9.0@ 155
Home of the Fastest Supercharged C6 9.7 @ 143mph
Proud Sponsor of the ECS Corvette Challenge
http://www.corvettechallenge.info
609-752-0321
Last edited by CHRIS NJ C5; Nov 23, 2004 at 02:42 PM.
Le Mans Master
Joined: Dec 2003
Posts: 7,506
Likes: 0
From: Hillsborough NJ
I'll take one. Wait a second, I have one already. 
Great deal on a killer set-up. Anyone wanting to know how good this is need only ask me. I have basically the same package (kept my Z06 Ti exhaust, though) and it is a fast, streetable and strip ready application.
Great deal on a killer set-up. Anyone wanting to know how good this is need only ask me. I have basically the same package (kept my Z06 Ti exhaust, though) and it is a fast, streetable and strip ready application.
Drifting
Joined: Dec 2002
Posts: 1,361
Likes: 0
From: Forest Hill MD
Originally Posted by Dr.Ron
I agree!!!
Most people that decide on a heads cam package will end up up doing all of the mods listed above sooner or later. You will save in labor if you do it all at once.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Burning Brakes
Joined: Jul 2004
Posts: 866
Likes: 5
From: Jensen Beach FL
I can attest to the fact that this is one great H/C package. ECS put nearly the same package together for me. I have different headers and a different clutch than what Chris is offering here. I believe I was one of the first to have the ECS custom grind cam installed with the AFR heads. This setup makes great power and torque and is actually very docile compared to other packages I have seen/heard. This can absolutely be considered a daily driver setup.
I think it goes without saying, but I’ll say it anyway. I have dealt with ECS several times and have always received top notch customer service and workmanship.
To anyone in the Baltimore area considering this package; I would be more than happy to let you check out my car. Shoot me an e-mail @ mgorman@suz.com
Mike
I think it goes without saying, but I’ll say it anyway. I have dealt with ECS several times and have always received top notch customer service and workmanship.
To anyone in the Baltimore area considering this package; I would be more than happy to let you check out my car. Shoot me an e-mail @ mgorman@suz.com
Mike
Thread Starter
Premium Supporting Vendor
Joined: Jan 2001
Posts: 17,681
Likes: 11
From: Central Jersey
Cruise-In II Veteran
Cruise-In III Veteran
Cruise-In V Veteran
Originally Posted by Bob50th
Hi Chris,
I have been trying to contact you to find out what it
would it cost me for this package with the work you already completed.
Thanks
I have been trying to contact you to find out what it
would it cost me for this package with the work you already completed.
Thanks
Le Mans Master
Joined: Aug 2003
Posts: 7,188
Likes: 1
From: New Blue 9.80 @ 142MPH stock motor
St. Jude Donor '03-'06-'07-'08
Originally Posted by Geneus
I'll take one. Wait a second, I have one already.
Great deal on a killer set-up. Anyone wanting to know how good this is need only ask me. I have basically the same package (kept my Z06 Ti exhaust, though) and it is a fast, streetable and strip ready application.
Great deal on a killer set-up. Anyone wanting to know how good this is need only ask me. I have basically the same package (kept my Z06 Ti exhaust, though) and it is a fast, streetable and strip ready application.
One green, one blue, one track, one street - kinda.
01 6sp bBlue coupe getting my 382 forged stroker on a D1-SC out of the green car and adding an alky kit, hd clutch and rear on the lift now at ECS
Pro
Joined: Nov 2003
Posts: 548
Likes: 0
Originally Posted by CHRIS NJ C5
It was nice to speak with you again Bob.. Let me know when you are ready to come down.. Is it still lobster season up there..
I will do the package, it is just a matter of when.
Lobsters are always in season here. Lobster will transport better in the cooler weather and I'll bring some Shrimp for Doug or would Doug prefer Moose meat? I can get that too.
Premium Supporting Vendor
Joined: Oct 2004
Posts: 23,599
Likes: 1,225
From: Providing the most proven supercharger kits for your C5/6/7 609-752-0321
Originally Posted by Bob50th
I will be in contact with you soon.
I will do the package, it is just a matter of when.
Lobsters are always in season here. Lobster will transport better in the cooler weather and I'll bring some Shrimp for Doug or would Doug prefer Moose meat? I can get that too.
I will do the package, it is just a matter of when.
Lobsters are always in season here. Lobster will transport better in the cooler weather and I'll bring some Shrimp for Doug or would Doug prefer Moose meat? I can get that too.
Are ECS customers the best? Boy I guess!!
Premium Supporting Vendor
Joined: Oct 2004
Posts: 23,599
Likes: 1,225
From: Providing the most proven supercharger kits for your C5/6/7 609-752-0321
Originally Posted by Geneus
How about the danish?
Don, I said ECS customerS are the best!!
You got the a.m. covered
