Piaa 1100x Installation
Former Vendor
Joined: Nov 2000
Posts: 5,607
Likes: 1
From: Houston TX
Originally Posted by T2001W
Would like to impose on someone who has installed the Piaa 1100x driving lights to give me the easiest way of installing them on my 2003 MSG vert. 
Wiring Diagram for installation on cars with stock fogs already.
http://www.litewarehouse.com/pics/P-1100X-Install.htm
Burning Brakes
Joined: Jun 2004
Posts: 939
Likes: 38
From: Riva MD
I have them on my 02 Z06. I bought them from Tuan Lee at litewarehouse.com. I needed the aftermarket mounting bracket since the Z06 doesn't come with them. I understand you can use the bracket for the stock lights since yours should have them. The physical install of the light is a snap: raise the headlights and take the bezels off. This gives you enough room to access the mounting points to screw them in and subsequently adjust them. I would recommend tying into the purple wire under the fuse panel in the engine so that they function like stock. There is power and a ground point in the same area. I added plastic conduit over the wire to make it all look tidy. I did mine using instructions from either this forum or one of the others (I can't remember): the instructions included pictures, which were extremely helpful. The total install time was probably 1 1/2 hour because I went slow (and dropped a socket under the battery requiring removal of the battery and battery tray to retrieve).
Definately a worthwhile mod.
Definately a worthwhile mod.
