Brite Third Light Installed!
Thread Starter
Burning Brakes
Joined: Jun 2004
Posts: 1,186
Likes: 21
From: West Tennessee
Brite Third Light Installed!
After installing the lens material 44 LED light, This is the best mod yet on my PR Coupe. Seemed to really sharpen the rear end IMHO.
Last edited by Karfever; Mar 1, 2005 at 07:53 AM.
Pro
Joined: Jun 2004
Posts: 693
Likes: 1
From: Centennial CO
Originally Posted by Karfever
After installing the lens material 44 LED light, This is the best mod yet on my PR Coupe. Seemed to really sharpen the rear end IMHO.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Thread Starter
Burning Brakes
Joined: Jun 2004
Posts: 1,186
Likes: 21
From: West Tennessee
Brite Ideas is a forum supporter you can do a search to locate their link, they also offer forum members 10% discount. Yes it is dark lens material not black.
The installation is extremly easy and is outlined in other posts. Basically you get one cold beer and open it, Take a sip or two then remove both inboard tailights (one screw each), take another sip of beer, then unplug the wire harness to the third brake housing, unscrew the four retaining nuts from th housing. Sit back and take a three minute break, finishing 2/3 of the can of beer. Install the new housing using the same process in reverse. Stand back and finish the beer and admire your hard work!
The installation is extremly easy and is outlined in other posts. Basically you get one cold beer and open it, Take a sip or two then remove both inboard tailights (one screw each), take another sip of beer, then unplug the wire harness to the third brake housing, unscrew the four retaining nuts from th housing. Sit back and take a three minute break, finishing 2/3 of the can of beer. Install the new housing using the same process in reverse. Stand back and finish the beer and admire your hard work!
Melting Slicks
Joined: Jul 2004
Posts: 3,316
Likes: 1
From: San Antonio Texas - Any sufficiently advanced technology is indistinguishable from magic
Hey, I like that... I remember from an interview Dave Hill gave, that was the original intent, but it wouldn't survive the crash test. I'll bet it would look good on my mag red.... 
Safety Car
Joined: May 1999
Posts: 3,525
Likes: 0
From: Kenton TN
www.vettepitstop.com makes and sells these lights (I have a silver one) in either paint body match colors or the red all lens colored one........ I have their color match door handles also, good price on those and Lloyd allowed me to return my stock black C6 handles for a 20.00 credit...... They are in Bowling Green and Lloyd said he will be selling products at the C5/C6 bash in April at the NCM........
Racer
Joined: Oct 2004
Posts: 398
Likes: 0
From: Horsin' Around in Norco California
Originally Posted by bramwellt
Any pix of a Lemans Blue install of this part anywhere? I like what it did for a red car...
