Installing the CHMSL Spoiler
Thread Starter
Melting Slicks
Joined: Jul 2004
Posts: 3,316
Likes: 1
From: San Antonio Texas - Any sufficiently advanced technology is indistinguishable from magic
Installing the CHMSL Spoiler
I've looked in the FAQs section but cannot find the instructions on how to remove and install the third brake light spoiler. I did install the body colored license plate frame, door handles, and engine covers, as well as the cargo organizer (doesn't even require the clips that come with it). They were very straight forward... and they look great! 
Can anyone direct me to installation instructions for the CHMSL?
Thanks,
Wayne
Can anyone direct me to installation instructions for the CHMSL?
Thanks,
Wayne
Melting Slicks
Joined: Apr 2005
Posts: 2,784
Likes: 559
go to the brite ideas web site (http://www.vettepitstop.com/faq.php)they have html instructions. You need a torex bit for the lights and a 10mm ratchet wrench head. Unsrew the lights with the torex then pull them out reach in and unsrew the 4 10mm bolts ( 2 on each side) unclip the electric connector then pull up. Installation is the reverse.
Le Mans Master
Joined: Mar 2002
Posts: 5,253
Likes: 50
From: Sandy Eggo Calif.
St. Jude Donor '06-'07-'08-'09-'10-'11-'12, '16
Thread Starter
Melting Slicks
Joined: Jul 2004
Posts: 3,316
Likes: 1
From: San Antonio Texas - Any sufficiently advanced technology is indistinguishable from magic
Originally Posted by dashotgun
go to the brite ideas web site (http://www.vettepitstop.com/faq.php)they have html instructions. You need a torex bit for the lights and a 10mm ratchet wrench head. Unsrew the lights with the torex then pull them out reach in and unsrew the 4 10mm bolts ( 2 on each side) unclip the electric connector then pull up. Installation is the reverse.
I now have body colored door handles, CHMSL, and engine covers, and it looks great!
