2006 Coupe ordered
Navigator
Joined: Mar 2005
Posts: 9
Likes: 0
From: elgin oklahoma
You might drive the car before you bother to install cags. I was all set to install it and started driving the car and now 6 months later Im not going to bother. btw, great color choice and congrats!
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
Le Mans Master
Joined: Dec 2002
Posts: 7,588
Likes: 6
From: Montreal Qc
Originally Posted by talldude67
VR/Cashmere/6spd/2lt, Coupe ordered 11-08. Question: best vendor to buy CAG's, bra, cover, thanks. This is the best forum to be on...course you knew that...
As for your questions......
Cags = Mid America,
Bra = Colgan (best value for the $, check around for price),
Cover = Stormsheild (I've have a few, this one is my favorite).
Melting Slicks
Joined: Jul 2005
Posts: 2,032
Likes: 4
From: Houston Tx
St. Jude Donor '06
Congratulations! It's a long wait, but definitely worth it!
I'm curious, your name talldude67, are you 6'7". My friend is 6'7" and does not fit in the car comfortably to drive it
I'm curious, your name talldude67, are you 6'7". My friend is 6'7" and does not fit in the car comfortably to drive it
Racer
Joined: Sep 2005
Posts: 302
Likes: 0
If the 1to4 shift bothers you, just disconnect the CAGS plug, put a 2.2Kohm resistor into the female plug, use electrical tap on both male and female plug, ang tie off the female plug. You can get resistors at Radio Shack for $1.00. I did it today and it took 10 minutes.