Just to track who is having problems despite GMs posting.

VIN range of recall is

2005 - 55100002 - 55135053
2006 - 65100001 - 65100046

 

Should have had choices: No, my VIN is in range and No, my VIN is not in range. Mine is at the end of the 2005 run and, so far it not making any noises or obviously delaminating. And it sits in the TX sun 8-10 hours a day.

 

Please edit the poll so we also get an idea of Yes vs. No.

I wonder if the issue is not the glue used, but some type of contamination that kept the glue from sticking, perhaps an oily film? that would explain why many have no problems, while others come completely unstuck.

 

My DSOM car top separated at the rear. I rarely sits in the sun and did snap crackle and pop very slightly a few days (I hope the Kellogs trademark police aren't watching or I will be posting from a jail cell) prior to separation .. I just came out of the store one day and the rear edge was noticeably above the seal at the back. Dealer ordered a new top. Paint matched perfect and so far so good.

 

Can't answer your poll, as my answer is No - my VIN is not in range.

Please fix the poll to have the additional answers necessary to have a complete poll.

 

Mine is outside of VIN range ('06 #07253) and has not delaminated - yet

 

U left out another choice:

I only have a TransParant Top - Unaffected

 

Same here !

 

Perhaps the pollster left out choices intentionally to suit the purpose of the poll.

If not, then another choice was left out: I don't have a C6.

.Jinx
not topless yet...

 

For the first time last Friday on my commute home, I heard cracking noises from the roof. That's after sitting in the Nevada sun at 105 degrees under a car cover all day. It's going to the dealer tomorrow.

 

My vin # was not in the recall. However the first time I took the top off it started. Went to the dealer, they said I needed a new top and it would be 2 weeks. I purchased a glass top out of pure fear that GM may not be able to fix this for a while.

Just wanted to make sure that the glass top doesn't become a back order.

 

Startin Mon right Bill?



This Bud's for U

 

Sorry the poll cant be edited, I would add to it if it were allowed.

However, I wasnt looking for information on who wasnt having a problem, but of the people who are having the problem on a C6, where their VIN falls.

I read a post by another member who quoted GM saying there are very few with actual problems so far, and the problem may spread past the current recalled VIN range. The purpose of this poll was to see real information as opposed to GMs statements, not to see how many arent having a problem.

If anyone wants other information, please start a different poll.

 

I wonder what percentage of C6 owners are forum watchers?.. What percentage of C6 forum owners had/have a problem? Has anyone tried to figure it out that way?

 

My Vin is in the range ........ and my top is fine ........ and brought it in for the recall

 

I completely agree with you - if GM has fixed the problem as they incorrectly say they have, there shouldn't be any of us with VINs outside the range who are having problems. It doesn't matter much to me if 5% or 50% of the VINs outside the range have the problem, as any positive number of people having this problem indicates to me that GM hasn't fixed it.

I started as similar poll a few days ago, and still appreciate any responses:

http://forums.corvetteforum.com/show....php?t=1406927