Iforge Evolutions
Thread Starter
Le Mans Master
Joined: Feb 1999
Posts: 5,492
Likes: 2
From: Florida
Iforge Evolutions
I have a potential to buy some of these for my C6. I don't know much about IForge, are they a good wheel? Do they accept factory TPS sensors? anything I should be watching out for?
Le Mans Master
Joined: Sep 2005
Posts: 9,864
Likes: 0
From: Central Florida. Black Sheep Squadron Member. 465 rwhp & 477 rwtq
Cruise-In VIII Veteran
St. Jude Donor '07
I can give you my personal experience on this. I order a set a while ago and could never get them balance right. Was sent once back to get them fixed and nothing changed. Then they didn't want to work with them again, so they accepted them and refunded my money. It was the worst experience I've ever had and will never buy them again. Again just my experience and I've heard a lot of others as well. Do a search on the web, you'll see a lot of people complain on these wheels. 
Good luck!
Good luck!
Drifting
Joined: Jun 2006
Posts: 1,992
Likes: 0
From: Bay Area Ca.
If you got your money back and still looking you should look at the CCW selection. I bought a set of CCW SP551 for my 07 Coupe. They answer the phone all day long & Emails. Got my order in less than 2 weeks and the wheels had to be made. I got a complete set of wheels, tires & sensors. Out of the box and on the car.
Le Mans Master
Joined: Mar 2003
Posts: 7,795
Likes: 2
From: Noblesville Indiana
CI 7-8 Veteran
St. Jude Donor '03-'04-'05
If you can get them the way you want them, then iForged is one of the best wheels available IMO. I had a set on my C5 and I'm getting ready to put a set on my C6.
Former Vendor
Joined: Aug 2005
Posts: 5,774
Likes: 0
From: Loganville GA
I just sold my set of Evolutions to a forum member. I've not had quality issues with iforged (2 sets), only slow customer service, although when I recently left a message to see about rehooping these for Z06 offsets, Vince actually called me back.
If you have Z51, you either need flush mount or very low profile valve stems on the front wheels, and have to mount the pressure sensor a different way. Iforged has the required valve stems if you need them.
If you have Z51, you either need flush mount or very low profile valve stems on the front wheels, and have to mount the pressure sensor a different way. Iforged has the required valve stems if you need them.
