When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
The NPP factory setting for going from "Mild to Wild" is 3500 RPMs. Does anyone know if its possible to reprogram the factory settings to set the opening point lower to say 2500 RPMs? Thanks.
From: Exhaust Commander Wireless Bi-Mode Exhaust Controllers, Innovative and advanced technology! --- Check out our website @ www.sunsetorangecreations.com
St. Jude Donor '13
Originally Posted by PAVette
The NPP factory setting for going from "Mild to Wild" is 3500 RPMs. Does anyone know if its possible to reprogram the factory settings to set the opening point lower to say 2500 RPMs? Thanks.
I sell a NPP/Z06 exhaust controller called: Ultimate Exhaust Commander with no splice rpm option.
It allows you to set the rpm at which the buterflies open, as well as giving you full open mode too and can switch back and forth using the wireless keyfob remote.
I have mine set to open at 2000 rpms and its great, just past the drone zone but open for the maximum ammount of time.