2008 Build Sheets
Thread Starter
Advanced
Joined: Dec 2007
Posts: 57
Likes: 0
From: Cary North Carolina
2008 Build Sheets
In looking over the build sheet that I received for my new '08, I don't see a 'code' for the actual date of assembly. Is there one and I'm just not seeing it? Is there another 'means' to determine its 'birth'?
Team Owner
Joined: Sep 2005
Posts: 20,352
Likes: 568
From: Ventura County, Calif
No, it isn't on the build sheet. You can PM gmautotech and ask him to run the VIN and get a VIS printout. It will show everything. Or you could post the VIN here and one of several members who can get the report will run it for you. 
Here is gmautotech's profile link to PM him:
http://forums.corvetteforum.com/member.php?u=221526
Here is gmautotech's profile link to PM him:
http://forums.corvetteforum.com/member.php?u=221526
Drifting
Joined: Dec 2007
Posts: 1,686
Likes: 1
No, it isn't on the build sheet. You can PM gmautotech and ask him to run the VIN and get a VIS printout. It will show everything. Or you could post the VIN here and one of several members who can get the report will run it for you.
Here is gmautotech's profile link to PM him:
http://forums.corvetteforum.com/member.php?u=221526
Here is gmautotech's profile link to PM him:
http://forums.corvetteforum.com/member.php?u=221526
https://store.corvettemuseum.com/ser...buildsheet.asp
Le Mans Master
Joined: Apr 2008
Posts: 8,474
Likes: 0
From: Birmingham, AL NCM Lifetime Member
No, it isn't on the build sheet. You can PM gmautotech and ask him to run the VIN and get a VIS printout. It will show everything. Or you could post the VIN here and one of several members who can get the report will run it for you.
Here is gmautotech's profile link to PM him:
http://forums.corvetteforum.com/member.php?u=221526
Here is gmautotech's profile link to PM him:
http://forums.corvetteforum.com/member.php?u=221526
Team Owner
Joined: Aug 2002
Posts: 35,617
Likes: 167
Tech Contributor
Cruise-In 11 Veteran
NCM Ambassador
St. Jude Donor '05-'06-'07-'10
VIS is the GM Vehicle Information System. It is the be all end all data store of Corvettes. This tracks the car via VIN through it's life. You can get a printout of all options, the build date and the service and recall history of the car. Any GM dealer can provide you with this information as well as a few forum members as noted above.
Le Mans Master
Joined: Apr 2008
Posts: 8,474
Likes: 0
From: Birmingham, AL NCM Lifetime Member
VIS is the GM Vehicle Information System. It is the be all end all data store of Corvettes. This tracks the car via VIN through it's life. You can get a printout of all options, the build date and the service and recall history of the car. Any GM dealer can provide you with this information as well as a few forum members as noted above.
I have been reading the forum for about a year and I agree with the people who have said you are among the most helpful and knowledgeable.
I am taking Museum Delivery next Saturday, May 17. I will try to figure out how to post pics and update the avitar shortly thereafter. Today is dedicated to cleaning out my garage.
This is my first Corvette. It is going to be a long week of waiting.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Thread Starter
Advanced
Joined: Dec 2007
Posts: 57
Likes: 0
From: Cary North Carolina
As a follow-up to my original post on build sheet information, where is there a source to 'decode' the various codes within the 'blocks' on the build sheet. Some I can figure out, others I haven't a clue. Also, for those of us who are vette fanatics, buying a laminated build sheet from the NCM is well worth the price. And, while you're at it, order the laminated window sticker as well. All of this becomes part of the DNA for your 'baby'.
Team Owner
Joined: Sep 2005
Posts: 20,352
Likes: 568
From: Ventura County, Calif
As a follow-up to my original post on build sheet information, where is there a source to 'decode' the various codes within the 'blocks' on the build sheet. Some I can figure out, others I haven't a clue. Also, for those of us who are vette fanatics, buying a laminated build sheet from the NCM is well worth the price. And, while you're at it, order the laminated window sticker as well. All of this becomes part of the DNA for your 'baby'.
http://corvetteactioncenter.com/spec.../2008rpos.html
Team Owner
Joined: Aug 2002
Posts: 35,617
Likes: 167
Tech Contributor
Cruise-In 11 Veteran
NCM Ambassador
St. Jude Donor '05-'06-'07-'10
Some of the codes on the build sheet don't correspond to anything that means anything to us "lay persons". Rather than post the RPO Code list here I will just refer you to this link:
http://corvetteactioncenter.com/spec.../2008rpos.html
http://corvetteactioncenter.com/spec.../2008rpos.html
Bear in mind that the build sheet codes for the most part will not correspond to the RPO codes. The build sheet is just that, it is the process sheet that the assembly plant uses to assemble the car. In many cases the codes on the build sheet are for specific harnesses and parts that the car will need to be completed. You can post the codes that you can't identify and someone here will be able to help you get it sorted out.
Team Owner
Joined: Aug 2002
Posts: 35,617
Likes: 167
Tech Contributor
Cruise-In 11 Veteran
NCM Ambassador
St. Jude Donor '05-'06-'07-'10
Thank you.
I have been reading the forum for about a year and I agree with the people who have said you are among the most helpful and knowledgeable.
I am taking Museum Delivery next Saturday, May 17. I will try to figure out how to post pics and update the avitar shortly thereafter. Today is dedicated to cleaning out my garage.
This is my first Corvette. It is going to be a long week of waiting.
I have been reading the forum for about a year and I agree with the people who have said you are among the most helpful and knowledgeable.
I am taking Museum Delivery next Saturday, May 17. I will try to figure out how to post pics and update the avitar shortly thereafter. Today is dedicated to cleaning out my garage.
This is my first Corvette. It is going to be a long week of waiting.
I imagine that you have all ready downloaded a copy of the owners manual, if not I'd suggest you do it and spend some time this week getting familiar with the features of your new Corvette. Looking forward to seeing the pictures. Enjoy the museum delivery, it is a wonderful experience that you won't soon forget.Paul
Team Owner
Joined: Sep 2005
Posts: 20,352
Likes: 568
From: Ventura County, Calif
http://forums.corvetteforum.com/show...58&postcount=1
Le Mans Master
Joined: Apr 2008
Posts: 8,474
Likes: 0
From: Birmingham, AL NCM Lifetime Member
In case you come back here, here is the how-to on posting pictures:
http://forums.corvetteforum.com/show...58&postcount=1
http://forums.corvetteforum.com/show...58&postcount=1
I have a couple of pictues from the Buyer's Tour that I might be able to post tomorrow (see earlier comment about cleaning out my garage today). The process seems fairly straightforward. What I will have to figure out is how I can use Adobe Photoshop Elements (the inexpensive software) to properly size the picture. I think if I post what I have, the pictures will be way too large.
Team Owner
Joined: Aug 2002
Posts: 35,617
Likes: 167
Tech Contributor
Cruise-In 11 Veteran
NCM Ambassador
St. Jude Donor '05-'06-'07-'10
Thank you.
I have a couple of pictues from the Buyer's Tour that I might be able to post tomorrow (see earlier comment about cleaning out my garage today). The process seems fairly straightforward. What I will have to figure out is how I can use Adobe Photoshop Elements (the inexpensive software) to properly size the picture. I think if I post what I have, the pictures will be way too large.
I have a couple of pictues from the Buyer's Tour that I might be able to post tomorrow (see earlier comment about cleaning out my garage today). The process seems fairly straightforward. What I will have to figure out is how I can use Adobe Photoshop Elements (the inexpensive software) to properly size the picture. I think if I post what I have, the pictures will be way too large.
If you use Photobucket.com you can elect to resize the pictures automatically when you upload them.
Le Mans Master
Joined: Mar 2006
Posts: 5,323
Likes: 2
From: Northern NJ
If you pick up a the NCM, you can order the build sheet while you are there. I ordered mine laminated, it came a few weeks later.
Safety Car
Joined: Dec 2007
Posts: 4,974
Likes: 148
From: Magnolia Texas
have a safe and enjoyable trip - its worth the effort.
Team Owner
Joined: Feb 2008
Posts: 30,688
Likes: 11
From: Ocala FL
When I did the Buyer's Tour, they gave me one of the originals that were printed. I had it laminated at the museum later that day.