When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I reviewed some good information from CF member BEZ06 who also has some very useful videos and posts about TPMS tools.
For those of you who are looking for a relatively inexpensive relearn tool, I picked one up today at the home office of ATEQ that seems to fit the bill well. It is the VT-10 tool that ATEQ sez works on all current domestic and Euro TPMS's. It works on my '08 Vette. The tool sells for $99 but has a $30 s & h fee which seems a little high.
Pros:
Works on all current vehicles domestic & Euro.
Simple one button activation.
Nice storage case with belt clip.
Only $99! !
Cons:
Can't be upgraded via the web.
No feedback from TPMS (such as psi, temp, s/n, etc).
You can get these features on more expensive models like the VT-55.
It sounds like this is not only cheaper than the Bartec Trackside, but it's WAY MORE CAPABLE!!!
The Trackside is a C6 only tool, whereas this ATEQ VT-10 sounds like it will work on your other vehicles with sensors too (and with the 2008 model year, ALL vehicles must have sensors and a TPMS).
I don't know why they charge 30 bucks to ship a small, lightweight tool!?!? Butt.....even with that high shipping charge it's the cheapest tool out there.
It sounds like this is not only cheaper than the Bartec Trackside, but it's WAY MORE CAPABLE!!!
The Trackside is a C6 only tool, whereas this ATEQ VT-10 sounds like it will work on your other vehicles with sensors too (and with the 2008 model year, ALL vehicles must have sensors and a TPMS).
I don't know why they charge 30 bucks to ship a small, lightweight tool!?!? Butt.....even with that high shipping charge it's the cheapest tool out there.
Bob
The tool works great on my '08 and was a one button operation. I talked to them about the $30 s & h so maybe they will take a look at that and trim it down some. $15.00 seems reasonable for s & h.
It's great to have a forum! I asked ATEQ if they could adjust their s & h fee down from $30.00 to $15.00. I received an email from them today and they stated that starting today the s & h will be $15.00 when ordered online at www.ATEQUSA.com. That puts the unit at $114.00 including s & h, will work on all current vehicles including Euro and makes it the least expensive tool I have seen so far.