Ron Fellows Help?
Thread Starter
Burning Brakes
Joined: Jun 2006
Posts: 794
Likes: 1
From: Groton Ct
Ron Fellows Help?
A friend just bought a Ron Fellows addition last week. However the car did not have the fender strips or the window decal. He was able to get the stripes but the window decal is no where to be found. He is also looking for the remote that opens the exhaust cuts outs. Any help would be appreciated.
Yes i have already contacted Gene Cully.
Yes i have already contacted Gene Cully.
Le Mans Master
Joined: May 1999
Posts: 6,841
Likes: 46
From: Laurel MT
Cruise-in I Veteran
Cruise-in II Veteran
Cruise-In III Veteran
We can help with the parts for this car as well.
Call toll free for parts, 800-234-5284. Competitive pricing, no sales tax and low S/H charges.
Ken Fichtner
Fichtner Chevrolet
Call toll free for parts, 800-234-5284. Competitive pricing, no sales tax and low S/H charges.
Ken Fichtner
Fichtner Chevrolet
Team Owner
Joined: Aug 2002
Posts: 35,617
Likes: 167
Tech Contributor
Cruise-In 11 Veteran
NCM Ambassador
St. Jude Donor '05-'06-'07-'10
Just to be clear. There is no "remote to open the exhaust cutouts" from the factory. The butterfly valves will open on their own at 3,500 rpm between 30% and 80% throttle. Above 80% throttle they will open at 2,800 rpm.
There are a couple of forum vendors that manufacture and sell a remote control. Have a look at forum vendor Pipedreams website at
http://www.nakidparts.com/
Have a look at his "Mild to Wild" controller.
There are a couple of forum vendors that manufacture and sell a remote control. Have a look at forum vendor Pipedreams website at
http://www.nakidparts.com/
Have a look at his "Mild to Wild" controller.
Thread Starter
Burning Brakes
Joined: Jun 2006
Posts: 794
Likes: 1
From: Groton Ct
Just to be clear. There is no "remote to open the exhaust cutouts" from the factory. The butterfly valves will open on their own at 3,500 rpm between 30% and 80% throttle. Above 80% throttle they will open at 2,800 rpm.
There are a couple of forum vendors that manufacture and sell a remote control. Have a look at forum vendor Pipedreams website at
http://www.nakidparts.com/
Have a look at his "Mild to Wild" controller.
There are a couple of forum vendors that manufacture and sell a remote control. Have a look at forum vendor Pipedreams website at
http://www.nakidparts.com/
Have a look at his "Mild to Wild" controller.
