Adding steering wheel controls
Melting Slicks
Joined: Dec 2005
Posts: 2,046
Likes: 13
From: Central Florida
When I had an '06 I though I'd do the same as you. Now I have a '07 and I never use them. It is just as easy to reach the radio. Besides, they are on the right side of the wheel, making them less convenient. Adding them will be a great waste of money as many components are required.
Team Owner
Joined: Aug 2002
Posts: 35,617
Likes: 167
Tech Contributor
Cruise-In 11 Veteran
NCM Ambassador
St. Jude Donor '05-'06-'07-'10
At a minimum you'll need a new wire harness from the wheel to the computer to allow connection and the controls for the wheel. I believe that you will also you will need a new head unit that can work with the controls. I don't believe that they are backward compatible (software) but I don't know of an upgrade path to get the new firmware for an older radio.
A lot of work and likely a lot of money.
A lot of work and likely a lot of money.
Thread Starter
Intermediate
Joined: Jun 2008
Posts: 38
Likes: 0
I plan on using a aftermarket deck with the pac adapter so it works with it. (This was going to involve me running new wires anyways).
Do you know if it's just a direct swap between the side and the side with the controls?
Thanks
Do you know if it's just a direct swap between the side and the side with the controls?
Thanks
