Question: First Modifcation
Thread Starter
Race Director
Joined: May 2008
Posts: 11,989
Likes: 14
Question: First Modifcation
Ok with spring just around the corner and my Vette being close enough to 1 year old. I would like to begin the slippery slope of starting to personalize my Car. What would be a good first mod? I was thinking fuel rail covers or maybe put chrome lettering on the rear bumper. Nothing to complicated and can be done over a weekend.
Le Mans Master
Joined: Mar 2007
Posts: 6,666
Likes: 14
From: Mission Viejo CA
Ok with spring just around the corner and my Vette being close enough to 1 year old. I would like to begin the slippery slope of starting to personalize my Car. What would be a good first mod? I was thinking fuel rail covers or maybe put chrome lettering on the rear bumper. Nothing to complicated and can be done over a weekend.
http://forums.corvetteforum.com/c6-c...some-pics.html
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Corvette & Porsche 911: How Two Icons Conquered the Last 25 Years
Joe Kucinski
2027 Chevrolet Silverado 1500 First Look: Everything You NEED to Know!
Michael S. Palmer
5 Best & 5 Worst Corvette Daily Drivers
Joe Kucinski
The Headlights of Every Corvette Generation Explained
Joe Kucinski
5 Best & 5 Most Overrated Corvette Track Packages of All Time!
Joe Kucinski
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
Le Mans Master
Joined: Feb 2008
Posts: 5,188
Likes: 4
From: S.F. Bay Area CA.
Here's what I did to mine. Do you have NPP?
Mods
transparent top
GCA top bag, outdoor car cover
GCA Z06 paint match rear spoiler, door handles, license plate frame
GCA splash guards
Racemesh black front and side vent grilles
Austin Barnett Custom Badges
GCA rear mat
Coverking, Neoprene seat covers
Mild 2 Wild, CAGS fuse
Garmin Nuvi 760
transparent top
GCA top bag, outdoor car cover
GCA Z06 paint match rear spoiler, door handles, license plate frame
GCA splash guards
Racemesh black front and side vent grilles
Austin Barnett Custom Badges
GCA rear mat
Coverking, Neoprene seat covers
Mild 2 Wild, CAGS fuse
Garmin Nuvi 760
Instructor
Joined: Feb 2009
Posts: 226
Likes: 0
I just started the same. I have a black Z-51 with the dual mod exhaust so yesterday I ordered the mild to wild switch, chrome lettering for the Corvette emblem on the rear bumber and those chrome caps to cover all the body panel screw heads in the doors, rear hatch and engine bay.
I'll be pulling off the fuel rail covers and painting them gloss black in the near future.
Have fun
I'll be pulling off the fuel rail covers and painting them gloss black in the near future.
Have fun
2005 Beast
Joined: Oct 2007
Posts: 2,586
Likes: 8
From: Tarpon Springs FL
Great First Mod - Not Too Expensive
A great first mod that isn't too expensive is:
Varraam Cold Air Intake
Magnaflow Exhaust
Melrose Headers
Painted Red Calipers
Dyno Tune
I spent for everything, roughly $4,400 everything installed complete.
Car sounds great, not too loud unless you hit it, wife likes that, the headers and exhaust are a good combo with the CAI and a good tune.
I got almost 70 horsepower... take a look. This mod is good for the car too, engine breathes better, more fuel efficient and man does she idle nice. Happy camper here.
Varraam Cold Air Intake
Magnaflow Exhaust
Melrose Headers
Painted Red Calipers
Dyno Tune
I spent for everything, roughly $4,400 everything installed complete.
Car sounds great, not too loud unless you hit it, wife likes that, the headers and exhaust are a good combo with the CAI and a good tune.
I got almost 70 horsepower... take a look. This mod is good for the car too, engine breathes better, more fuel efficient and man does she idle nice. Happy camper here.
Last edited by TBonez; Feb 25, 2009 at 01:40 PM.
Le Mans Master
Joined: Feb 2008
Posts: 5,188
Likes: 4
From: S.F. Bay Area CA.
Go with the NPP.
But I put borlas on
Melting Slicks
Joined: May 2007
Posts: 3,251
Likes: 769
From: Lindenhurst, IL
Here's what I did:
1. Borla Stingers
2. Padded leather console cushion
3. Custom DS Vettes (real) leather for the shifter & e-brake
4. Intake
5. Spoiler......a real one....not like the Z06
6. On and on and on.......
1. Borla Stingers
2. Padded leather console cushion
3. Custom DS Vettes (real) leather for the shifter & e-brake
4. Intake
5. Spoiler......a real one....not like the Z06
6. On and on and on.......
Race Director
Joined: Jun 2002
Posts: 12,198
Likes: 15
From: Columbia MD
Temper your enthusiasm - you'll only get back 50% or less for whatever you put in it or on it. Personally, I think $1800 is rediculous for an aftermarket catback exhaust that gives sound only. But it's your ride so mod on. 
Advanced
Joined: Jun 2008
Posts: 96
Likes: 0
From: okc ok
chrome letter would be a good start. that is the first mod for me. got mine from cca....simple/easy and durable.
for me, deciding on what get/do was simple.....i first modify for driveabilty.....ie the dual mode exhaust switch, front end cover, rear hatch partition.....then i buy/modify to enhance the look (plan to set new pedals and more carbon fiber inserts). the stainless steel letter inserts were not that expensive so i ended up doing that first.
if you have dual mode exhaust, then the bi-mode exhaust remote is also a must.
for me, deciding on what get/do was simple.....i first modify for driveabilty.....ie the dual mode exhaust switch, front end cover, rear hatch partition.....then i buy/modify to enhance the look (plan to set new pedals and more carbon fiber inserts). the stainless steel letter inserts were not that expensive so i ended up doing that first.
if you have dual mode exhaust, then the bi-mode exhaust remote is also a must.