Just kidding. Some of the interior badges on the bin and stuff are okay IMO. But the addtional stuff on the outside is unneccessary. I like the sleek polished look.
did it on my 2008 too. Changed both front and rear crossflags emblems to 2010 chrome surround style and they look very nice. 
Emblems?
Thread Starter
Instructor
Joined: Feb 2009
Posts: 144
Likes: 0
From: Allen TX
Emblems?
Was wanting to get input from other owners on their use of additional emblems or badges....
The Corvette, and the C6 in particular, is very understated in it's use of badging, both on the exterior and interior.....I don't see many Vettes that have added additional emblems and wondered if this was just personal preference or an unwritten rule amongst Corvette owners....
I, for the most part, like the lack of emblems on the car.....everybody knows what it is already.....I just installed a new Vettebin and was considering adding a C6 emblem to it like I've seen others do, and it got me thinking about the use of emblems inside and out and what others have done.....
I've even wondered what people thought about using some of the C2 & C3 "StingRay" badges on either the interior or exterior of their C6......crazy?
Post pics if you've done some additions to your car.....
The Corvette, and the C6 in particular, is very understated in it's use of badging, both on the exterior and interior.....I don't see many Vettes that have added additional emblems and wondered if this was just personal preference or an unwritten rule amongst Corvette owners....
I, for the most part, like the lack of emblems on the car.....everybody knows what it is already.....I just installed a new Vettebin and was considering adding a C6 emblem to it like I've seen others do, and it got me thinking about the use of emblems inside and out and what others have done.....
I've even wondered what people thought about using some of the C2 & C3 "StingRay" badges on either the interior or exterior of their C6......crazy?
Post pics if you've done some additions to your car.....
Instructor
Joined: May 2009
Posts: 156
Likes: 0
From: VIRGINIA BEACH VA
I have been going through a similar dilemma. I want to put a Jake logo somewhere on the car to show my support for Corvette Racing but I'm not so sure I want to slap a sticker on the outside. Might put a small Jake next to the Corvette logo on the dash.
Drifting
Joined: Oct 2008
Posts: 1,663
Likes: 0
From: DFW TX
Melting Slicks
Joined: Jun 2009
Posts: 3,142
Likes: 1
From: SE Coast FL
You can replace the GM chicklets with a Jake chicklet... inexpensive too.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
Thread Starter
Instructor
Joined: Feb 2009
Posts: 144
Likes: 0
From: Allen TX
Le Mans Master
Joined: Jul 2004
Posts: 5,865
Likes: 6
From: Saraland Alabama
St. Jude Donor '11-'12-'13-'14-'15-'16
I am not sure of how the C6 emblems are attached but I do know that most people removing emblems from C5s used a piece of monofilament fishing line and a sawing motion to cut through the glued on backing of the emblem. Glue residue can then be removed with 3M adhesive remover or Goo Gone.
I am sure someone else will chime in with exact details. It seems like I read that one or both C6 emblems have a stud in addition to glue.
I am sure someone else will chime in with exact details. It seems like I read that one or both C6 emblems have a stud in addition to glue.
Team Owner
Joined: Oct 2004
Posts: 27,420
Likes: 64
From: San Clemente CA
I am not sure of how the C6 emblems are attached but I do know that most people removing emblems from C5s used a piece of monofilament fishing line and a sawing motion to cut through the glued on backing of the emblem. Glue residue can then be removed with 3M adhesive remover or Goo Gone.
I am sure someone else will chime in with exact details. It seems like I read that one or both C6 emblems have a stud in addition to glue.
I am sure someone else will chime in with exact details. It seems like I read that one or both C6 emblems have a stud in addition to glue.
The best place to buy them is Fred Beans. dwittleinger@fredbeans.com He has the best price on the forum.
