ATT:: HELP ASPA c6 shift box problem!!!!
Thread Starter
Drifting
Joined: Jul 2005
Posts: 1,694
Likes: 4
From: Franklin Square Long Island NY
ATT:: HELP ASPA c6 shift box problem!!!!
Im in the middle of installing my c6 shift box and it seems to be jammed and doesnt move at all like the stock z06 assembly which moves freely is there something i need to do to make it move freely?
Safety Car
Joined: Nov 2006
Posts: 4,023
Likes: 266
From: San Jose California
Did you remove the "L" shaped pin that holds the shift lever stationary for installation alignment? Once you have the shift box installed and the linkage hooked up you can pull that pin out (pliers will do it.) Then the shifter should work normally (assuming that's the problem.)
Z//
Z//
Last edited by Zoxxo; Sep 30, 2009 at 10:50 PM.
Thread Starter
Drifting
Joined: Jul 2005
Posts: 1,694
Likes: 4
From: Franklin Square Long Island NY
Did you remove the "L" shaped pin that holds the shift level stationary for installation alignment? Once you have the shift box installed and the linkage hooked up you can pull that pin out (pliers will do it.) Then the shifter should work normally (assuming that's the problem.)
Z//
Z//
